Satellitare
Hello!
This ID sends data on GPRS.
Delete the password in the tracker settings to parse additional packages.

    I thank you for checking and for giving me the confirmation.

    what deceived me was that the tracker is always offline and with the new update it is not possible to view the messages history, useful to understand how often the position is sent.

    how come in some respects the new orange is pejorative?

    with the old platform kingneed were regularly online.

    You can fix this?

    it becomes more complicated to use orange if the tracker is always offline.

    also because there are many legacy trackers.

    Thanks

    • chol replied to this.

      Satellitare
      We ’re still in the process of debugging. For messages use tools/toolbox.

        Ah ok have see toolbox.

        For debugging, as mentioned above use the:

        Kingneed T8800
        ID: 864768011370043

        because this is in my hand.

        Update me when have news.
        Thanks

        Sorry Chol can update me? have you finished debugging? Thanks

        • chol replied to this.

          Satellitare
          We are done debug. The data from the tracker received normally. Check it.

            Yes tracker send data normally, but device its always offline.

            Issue its with new orange device its always offline.
            With old orange tk8800 and other kingneed see online normally.

            I have ask if you can fix this

            • chol replied to this.

              Satellitare
              Legacy mode only offline. It works only to receive data from the old hardware gateway. Does not support commands.

                23 days later

                Hello, I joined the Kingneed T12SE and immediately all the functions worked perfectly. Next, I connected the T8800 and is seen online, sending data, but I do not see the position on the map. Could you give me an advice please ? ID: 864768010730965. Thank you very much

                • chol replied to this.

                  In the tracker, of course, I set it to routetrack 99-means always on. Please advise, thank you

                  The GPS WOX normally sends me data and location with the same settings I have for GPS Trace.

                  a month later

                  I am following this post. I have a Kingsneed TK20C. What settings do I need to use to pair that unit to this website?

                  • chol replied to this.
                    2 months later

                    Hello. I finally took the time to setup my TK20C tracker. What I found out is that I can see actual movement of the tracker but unable to view any history. Nothing there. Have I set this unit up incorrectly during setup? Why I can see real time movement but no history?

                    • ashe replied to this.

                      I have a Kingneed TK20C tracker. I have reset the unit and entered in all of the IP and PORT data (setip19319316516621766*). The unit is set as a Legacy using a Kingneed TK20 setting on GPS-Trace. I have entered the TK20C IMEI number (015136000624549). I can see the unit position on the map, which is correct location, on the GPS-Trace website. But the website does not show any data. Just states it is offline. What am I doing wrong?

                      • ashe replied to this.

                        SteveEdgar Hello!
                        Please configure your tracker on the following server and port for debugging: server 193.193.165.37 port 22785
                        Write to us when you do this.