Problem Xexun TK 102-2
Me gustaría saber cuál es la configuración adecuada con la nueva aplicación, para la tk102 2 , desde que cambio de aplicación el gps me gasta la batería en una semana, quería saber cuál es el comando adecuado para que se quede dormida , y también no me contesta al teléfono máster , alguna solución ?.
Hol otra vez , mi problema es que en la anterior aplicación de gps trace iba perfectas , se movían y al pararse se dormían , desde que e cambiado a la nueva aplicación , no se como configurarlas bien , no sé si desde tools se puede configurar, que de casa 30 Segundo , y al parar que se quede dormida , sobre todo para ahorra batería , las que e migrado desde la antigua aplicación , dan señal seguido y se les acaba la batería en 5 días , on l anterior aplicación duraban 30 , gracias .
- Edited
Hi,
I’ve got same problem with my Xenun Tk103-2 who is offline since new server.
any idea? I try all many time..
begin123456
apn123456 free
apnuser123456 free
apnpasswd123456 free
adminip123456 193.193.165.37 32329
t005 *** n123456
tracker123456
time zone123456 0
Now my tracker is on 193.193.165.37 26120 for test.
Imei. 013227006805554 11 digit +0
027006805554
Thanks
PS: i made test with http://id.wialon.net/ with IP 193.193.165.167 and port 20462, my tracker is online !
Xexun TK103-2 20462 013227006805554 13 s
Hello , I’ve lived in Thailand.. I have the same problem. I have an Xexun Tk 103-2, on the old platform I had no problem.
I had to create a new account and create new device ID with 15 IMEI, 353451042487452, & “0+11(last imei), 051042487452″ to check the problem.
I tried configure it with Ip 193.193.165.37 and port 32329 & 26120 , set timezone to 0 and 7 . But, all of that setting, nothing picks up signal.
My device works correctly through sms commands to send back the correct gps position, but through the platform nothing.
Finally, my setting were ip 193.193.165.37port 26120 (not 32329 as u suggest to TAXI06567), imei 353451042487452, device type as xexun.
Thank’s a lot for your answer.
sudhevsutasanasuang
20/03/2020 at 11 o’clock (UTC) there were connections on port 26120, but they do not match your imei. Perhaps your imei tracker does not match the transmitted.
Hello,
I have similar problem, I have Xexun TK 102-2, ID:864894030680046 - I put 094030680046
IP:193.193.165.37 Port 26731
Still not connected. Can you check for me what am I doing wrong? Thanks in advanve.Michal
michal_kovac Hello!
Please check that you have correctly configured the APN on the tracker, and that everything is fine with the SIM card or chip that you use with the tracker, that there are enough funds and that the data transfer limits are not exceeded.
If everything is fine with this, then please try to identify your tracker on id.wialon.net as one of the devices Xexun TK 102-2.
If your tracker is determined, take a screenshot, write down the name of the model of the tracker and the identified ID (may coincide with the IMEI, may be part of it with zero or without).
After that, return to the application in the unit settings (unit menu - Settings - Common Settings), specify the determined model and ID. After that, configure the tracker on the defined server and port.
I checked,still not working,is there any possibily to lokate the device only through the SMS?
michal_kovac Hello!
Could you clarify whether you tried to identify the tracker on id.wialon.net?
I did, I was following : STEP 1:
To check the unique ID of a GPS device, direct it to the IP address 193.193.165.167 and a corresponding port (see devices/ports list).
I tried to direct the device to mentioned IP adress and port 20157 or 20668, but the response from device was “pwd fail”….:-(
michal_kovac Hello!
If you received such a response from the tracker, then you have a problem with the specified password when sending a command.
How did you previously send commands when configuring the tracker to the port and server specified in the application? Could you ask the tracker for the current settings?
I dont think so…..when I send to GPS device dmessage adminip123456 193.193.165.37 26120….the response is adminip OK!
michal_kovac Hello!
In this case, please try sending the command to identify the tracker to id.wialon.net again (for Xexun TK 102-2 for id.wialon.net: server - 193.193.165.167, port - 20668). Maybe the last time there was some kind of typo, for example, there was no space or there was a temporary failure.
OK it worked, I have confirmed unique ID with id.wialon.net, my ID is 864894030680046, I am trying to connect through the application ruhavik.gps-trace.com where I filled in ID 094030680046,but it shows me only “waiting for connection”….Am I doing anything wrong?
- Edited
michal_kovac Hello!
You write that on id.wialon.net you have an ID 864894030680046, then you need to enter it in the unit settings in the application.
In most cases, such devices really have ID 0 + 11 of the last IMEI digits, but sometimes all 15 IMEI digits are sent by tracker. If 15 digits was determined on id.wialon.net, then you need to enter them.
If there is any misunderstanding, please attach a screenshot where we can see how the tracker was identified on id.wialon.net.
I did, I filled in the application on ruhavik.gps-trace.com ID in 15charactestics, then I tried 0+12 characteristics and also 0+11 charactestics….and I am still not able to connect. I can send you screenshot if you send your email adress.Thanks for helping me in advance.Michal
- Edited
michal_kovac Hello,
You can send your screenshot to support@gps-trace.com
In the email, briefly describe the problem, and also indicate the login and ID of the device you want to use, then we can check your problem additionally.