Problem Xexun TK 102-2

TAXI06567 Hello!
We received a letter with your data and responded to it on 10.02.2020 and did not receive feedback.
We suggest you try other protocols from here https://forum.gps-trace.com/d/340-how-to-connect-trackers-of-types-gt06-gt06n-gt02-gt02a-tk110-and-etc , and not just Xexun
Did you do it?
Because you only write that you tried only 2 options, which were mentioned in the very first letter.

ashe Hello

I tested with the Xexun protocol (12 character ID: 0 + [11 last digits of IMEI].
I have tried with Coban or Concox protocol (15 character IMEI.)

The port that was indicated is 32329, I also saw in the forum, port 26120, and also tested with the port that was previously used 20462.

The tracker works perfectly, from what I understand, that I am not finding the appropriate port.

At all times UTC is set to 0.

Best regards and sorry for the inconvenience

TAXI06567 Hello!
What settings are installed right now on both the tracker and the application?

ashe Good

In the application I have: I have created 2 units of the 3 possible ones, which can be created.

1. Called “Taxi06567” with the device Tk103-2 and 15 digits of IMEI: 012207005011323
2. Called “test” with the device Tk-103-2 and 0 + the last 11 digits IMEI: 007005011322

In the tracker configuration:

begin123456
apn123456 airtelnet.es
apnuser123456 vodafone
apnpasswd123456 vodafone
adminip123456 193.193.165.37 32329
t005 *** n123456
tracker123456
time zone123456 0

That is the configuration of my tracker, which in the different occasions that I have commented, I have tried changing the port, 26120, (commented in the forum by another administrator) and by the old one that was used in the old platform 20462.

And I’ve been testing the tracker on another platform, of course it is changing IP and ports. And it worked perfectly. I have returned to configure the tracker, to the mentioned configuration. But I need it and I can’t be like this if I can’t find a quick solution.

TAXI06567 Hello!
Please configure your tracker on the following server and port for debugging: server 193.193.165.37 port 26120
We will see what data is sent by the tracker. At this time you will not see data.
Write us when you do it.

Hello I have already configured the tracker with the IP and the indicated port.

TAXI06567 Hello!
In registered object, in ID of 15 digits there is a typo (you need 012207005011322, you write 012207005011323)
Make changes there and reconfigure the tracker on the port and object server in the application (type Xexun).
Write us if it doesn’t work.

Thank you very much !!!!! A thousand kisses, do not see the joy that has given me when I have seen the tracker connected … Thank you, and sorry for all the inconvenience caused

TAXI06567 Hello!
It’s great that everything works for you
We are always happy to help)

Me gustaría saber cuál es la configuración adecuada con la nueva aplicación, para la tk102 2 , desde que cambio de aplicación el gps me gasta la batería en una semana, quería saber cuál es el comando adecuado para que se quede dormida , y también no me contesta al teléfono máster , alguna solución ?.

Hol otra vez , mi problema es que en la anterior aplicación de gps trace iba perfectas , se movían y al pararse se dormían , desde que e cambiado a la nueva aplicación , no se como configurarlas bien , no sé si desde tools se puede configurar, que de casa 30 Segundo , y al parar que se quede dormida , sobre todo para ahorra batería , las que e migrado desde la antigua aplicación , dan señal seguido y se les acaba la batería en 5 días , on l anterior aplicación duraban 30 , gracias .

Tisolas Hello!
Unfortunately, probably at the moment there is no such function.

Hello , I’ve lived in Thailand.. I have the same problem. I have an Xexun Tk 103-2, on the old platform I had no problem.
I had to create a new account and create new device ID with 15 IMEI, 353451042487452, & “0+11(last imei), 051042487452″ to check the problem.
I tried configure it with Ip 193.193.165.37 and port 32329 & 26120 , set timezone to 0 and 7 . But, all of that setting, nothing picks up signal.
My device works correctly through sms commands to send back the correct gps position, but through the platform nothing.
Finally, my setting were ip 193.193.165.37port 26120 (not 32329 as u suggest to TAXI06567), imei 353451042487452, device type as xexun.
Thank’s a lot for your answer.

sudhevsutasanasuang
20/03/2020 at 11 o’clock (UTC) there were connections on port 26120, but they do not match your imei. Perhaps your imei tracker does not match the transmitted.

Hello,

I have similar problem, I have Xexun TK 102-2, ID:864894030680046 - I put 094030680046
IP:193.193.165.37 Port 26731
Still not connected. Can you check for me what am I doing wrong? Thanks in advanve.Michal

michal_kovac Hello!
Please check that you have correctly configured the APN on the tracker, and that everything is fine with the SIM card or chip that you use with the tracker, that there are enough funds and that the data transfer limits are not exceeded.
If everything is fine with this, then please try to identify your tracker on id.wialon.net as one of the devices Xexun TK 102-2.
If your tracker is determined, take a screenshot, write down the name of the model of the tracker and the identified ID (may coincide with the IMEI, may be part of it with zero or without).
After that, return to the application in the unit settings (unit menu - Settings - Common Settings), specify the determined model and ID. After that, configure the tracker on the defined server and port.

I checked,still not working,is there any possibily to lokate the device only through the SMS?

michal_kovac Hello!
Could you clarify whether you tried to identify the tracker on id.wialon.net?