Problem Xexun TK 102-2

Hello I have already configured the tracker with the IP and the indicated port.

TAXI06567 Hello!
In registered object, in ID of 15 digits there is a typo (you need 012207005011322, you write 012207005011323)
Make changes there and reconfigure the tracker on the port and object server in the application (type Xexun).
Write us if it doesn’t work.

Thank you very much !!!!! A thousand kisses, do not see the joy that has given me when I have seen the tracker connected … Thank you, and sorry for all the inconvenience caused

TAXI06567 Hello!
It’s great that everything works for you
We are always happy to help)

Me gustaría saber cuál es la configuración adecuada con la nueva aplicación, para la tk102 2 , desde que cambio de aplicación el gps me gasta la batería en una semana, quería saber cuál es el comando adecuado para que se quede dormida , y también no me contesta al teléfono máster , alguna solución ?.

Tisolas Hello!
All possible additional settings are in the unit menu - Tools - Setbox.
If you mean any other settings, write more about this.

Hol otra vez , mi problema es que en la anterior aplicación de gps trace iba perfectas , se movían y al pararse se dormían , desde que e cambiado a la nueva aplicación , no se como configurarlas bien , no sé si desde tools se puede configurar, que de casa 30 Segundo , y al parar que se quede dormida , sobre todo para ahorra batería , las que e migrado desde la antigua aplicación , dan señal seguido y se les acaba la batería en 5 días , on l anterior aplicación duraban 30 , gracias .

Tisolas Hello!
Unfortunately, probably at the moment there is no such function.

Hello , I’ve lived in Thailand.. I have the same problem. I have an Xexun Tk 103-2, on the old platform I had no problem.
I had to create a new account and create new device ID with 15 IMEI, 353451042487452, & “0+11(last imei), 051042487452″ to check the problem.
I tried configure it with Ip 193.193.165.37 and port 32329 & 26120 , set timezone to 0 and 7 . But, all of that setting, nothing picks up signal.
My device works correctly through sms commands to send back the correct gps position, but through the platform nothing.
Finally, my setting were ip 193.193.165.37port 26120 (not 32329 as u suggest to TAXI06567), imei 353451042487452, device type as xexun.
Thank’s a lot for your answer.

Hello,

I have similar problem, I have Xexun TK 102-2, ID:864894030680046 - I put 094030680046
IP:193.193.165.37 Port 26731
Still not connected. Can you check for me what am I doing wrong? Thanks in advanve.Michal

michal_kovac Hello!
Please check that you have correctly configured the APN on the tracker, and that everything is fine with the SIM card or chip that you use with the tracker, that there are enough funds and that the data transfer limits are not exceeded.
If everything is fine with this, then please try to identify your tracker on id.wialon.net as one of the devices Xexun TK 102-2.
If your tracker is determined, take a screenshot, write down the name of the model of the tracker and the identified ID (may coincide with the IMEI, may be part of it with zero or without).
After that, return to the application in the unit settings (unit menu - Settings - Common Settings), specify the determined model and ID. After that, configure the tracker on the defined server and port.

I checked,still not working,is there any possibily to lokate the device only through the SMS?

michal_kovac Hello!
Could you clarify whether you tried to identify the tracker on id.wialon.net?

I did, I was following : STEP 1:
To check the unique ID of a GPS device, direct it to the IP address 193.193.165.167 and a corresponding port (see devices/ports list).
I tried to direct the device to mentioned IP adress and port 20157 or 20668, but the response from device was “pwd fail”….:-(

michal_kovac Hello!
If you received such a response from the tracker, then you have a problem with the specified password when sending a command.
How did you previously send commands when configuring the tracker to the port and server specified in the application? Could you ask the tracker for the current settings?

I dont think so…..when I send to GPS device dmessage adminip123456 193.193.165.37 26120….the response is adminip OK!

michal_kovac Hello!
In this case, please try sending the command to identify the tracker to id.wialon.net again (for Xexun TK 102-2 for id.wialon.net: server - 193.193.165.167, port - 20668). Maybe the last time there was some kind of typo, for example, there was no space or there was a temporary failure.

OK it worked, I have confirmed unique ID with id.wialon.net, my ID is 864894030680046, I am trying to connect through the application ruhavik.gps-trace.com where I filled in ID 094030680046,but it shows me only “waiting for connection”….Am I doing anything wrong?