Concox JM-LL01

MatthiasB

Hello GPS Trace Team
Is the Concox JM-LL01 tracker to be included in the system ? If yes, when ?
Or is there another device type that works for this device ?

dapi

MatthiasB Hello.
First try to configure your tracker as Concox device. When you create a unit you should specify in the settings:
Device Category - Hardware
Device Type - Concox
After that, you can find in the unit menu - Settings - Common settings port and server on which you need to configure the tracker.
If your tracker supports DNS server format, then configure the tracker to:
Server Host - 36373.flespi.gw
Port - 21546
If your tracker only supports the IP server format (to see it, click the IP button next to the server value), configure the tracker to:
Server Host - 193.193.165.37
Port - 21546
Write us back about the results.

MatthiasB

hello dapi,
thank you for the response :-)

First in the ruhavik application I deleted the device, I did tests before.
Then I created a new device with exactly the settings you wrote.
The ID is correctly configured to the device IMEI.

The tracker is configured as..
command server,<pw># –> SERVER,1,36373.flespi.gw,21546
1 means set with domain name
is in Tracking Mode with 30 minutes report interval of GPS data tracking, when standing still.
command mode –> MODE:1,60,1800
the url command delivers a valid position.

From time to time I can see the following in ruhavik.
Online
Number of satellites:
First message time:
No info
Last message time:
No info
Last positional message time:
No info
Message storage:
-
Forecast days ttl:

Between it’s
Offline

When I moved the device, I got SMS via the phone
and saw the green Online State in ruhavik, but not more.
The time of this drop off and vibration event was 23.10.2020 CEST 19:41 UTC 17:41

edit 25.10.2020
Now the tracker is in its winter quarters, in sleeping MODE:2,09:00,12.
That means it wakes up twice a day 09:00 CET and 21:00 CET and sends some data as I can see in the telco provider data usage log.

ashe

MatthiasB Hello!
Sorry for the long wait for an answer. Our specialists checked the data. For this model of tracker, the new data was set so it was not parsed and error was arisen.
At this moment, changes have been made and everything should be work.
Also, this model was added to the list of devices. Now you can choose in the settings:
Device Category - Hardware
Device Type - Concox JM-LL01

MatthiasB

Hello Ashe
I can confirm, your platform is working now with my Concox JM-LL01.
Great work and in my opinion fast. Congratulation and thanks to you and the team !
Regards, Matthias

ashe

MatthiasB Hello!
We are glad that at the moment everything works for you!)
If you have any questions about the application or suggestions for improving it, please write to us.

TelisValaoritis

please can you help me..
I buy a GPS 4g JM-LL01 and I use a SIM card with all the Gs anable 4g 3g 2g so I try to set it up so I send SMS commands to the device but not reply back to confirm the command so on the tracksolid platform is working ok but not reply to my commands

ashe

TelisValaoritis Hello!
How did you configure the tracker to the required port and server for data transfer without using commands?
Please tell us about the problem in more detail. Do you want to connect this tracker to the Ruhavik application?

TelisValaoritis

I am using the tracksolid application and I try to set up the JM-LL01 via SMS commands via my mobile phone.so I send first the APN,CYTAMOBILE# to start and the device not reply but accept the command I send SOS,A,99683065#
To the device and still accepting the command but not reply the only time who send me SMS to my mobile is alerts when is vibrate or move ..I don’t know I use many GPS from this company and is ok I know how to do the settings .. thanks for helping..the Chinese girl from the AliExpress jimm company not help

ashe

TelisValaoritis Hello!
First of all, I should note that this forum is intended for users of the Ruhavik application.
Does the tracker respond to commands such as APN# or SERVER#
according to the manufacturer’s instructions (https://www.iconcox.com/uploads/soft/200826/1-200R6151056.pdf)?
If it answers, then please check that its answers.
If not please check commands, in accordance with the manufacturer’s instructions (information in the PWDSW command), if a password is enabled, then it must be specified as the first parameter. That is, in your command, perhaps after the name of the command, you first need to specify the password and then only the APN separated by commas.
Also you can check the level of 4G communication, maybe in the place where you are there are small ones with a signal level, for example?

mazza63

TelisValaoritis
Good morning Telis, I have your same problem with a VL04, I also receive sms for movement or vibration alert but I don’t receive any other message after sending commands via sms. Did you solve it in any way that can help me? Thank you!!

TelisValaoritis

No the device not respond to any command ..the only time who responds is when is alerts notification .how I will find out about the 4g strength in my area ??
I download the Ruhavic and I will try it.
So maybe I must create a password for the device via Bluetooth iPhone first and then start to send SMS settings ??

ashe

TelisValaoritis Hello!
For the level of 4G communication in your area, you can try to check with the provider.
Have you tried sending commands to the tracker with the default password (666666), which is specified in the manufacturer’s instructions https://www.iconcox.com/uploads/soft/200826/1-200R6151056.pdf?

TelisValaoritis

i add the 666666 password but still not reply.
thank you

ashe

TelisValaoritis Hello!
In this case, please try to check the operability of the SIM card that you use with the tracker, and the level of 4G communication, for example, on your phone.
If all is well with this, then please try to turn off and turn on the tracker.
If this does not give any results, then try contacting the seller or manufacturer of the tracker, perhaps it has some kind of malfunction if it does not respond to commands with a working and connected SIM card. Or perhaps the manufacturer will be able to suggest additional checks that you can do in this case.

JuanJoseMartinezGonzalez

I bought this product but the battery consumption is high. What I noticed is that it does not go to sleep mode after 10 minutes as it did with the AT6, it will be some configuration problem, or this equipment does not have that function.

ashe

JuanJoseMartinezGonzalez Hello!
Do you need any help or did you write this information to help other users?
You can try to set the intervals for sending data in a different way, perhaps this will reduce the consumption of the battery.

MatthiasB

JuanJoseMartinezGonzalez
Hi Juan, to get an acceptable battery consumption for Concox JM-LL01, you have to combine tracking mode with stop mode.
mode,pw,1,300,86400#
stopmode,pw,on,300,0,300#
with this setting I hope to have the device running for 150 days - we’ll see.
The behavoior is, that it wakes up to send data to the tracking platform once per 24h.
And it wakes up if it moves out of defined fences.
gfence,pw,1,on,0,Nxx.xxxxxx,Exx.xxxxxx,3,,1#
pw is a passcode you can define.
More informations about the tracker can be founde here.. www.iconcox.com
Regards

Nuri57

Some sms commands for configuration:
Status#
WHERE#
Apn#
Server#
Asetgmt,on#
Reset#
Distance#
Sends#
Fence#
Senalm#
SENALM,ON,1#
Sosalm#
Moving#
Speed#
SPEED,ON,20,150,1#
LEVEL#
Led#
RELAY,1#
RELAY,0#
PWDSW,ON#
Sos,passw#
Url#
Clear#
Batalm#
Poweralm#
ACCREP#
CALL#
STATICREP#
mileage#
CENTER#
SOSPERMIT#
SOSPERMIT,passw,1,1#
SIMNO#
Gpson#
Relay#

LockroomTechnical

HI IM SMSing THE JMLL-01 UNIT TO PUT IT ONLINE AND IM GETTING THE RESPONSE SERVER SET OK BUT STILL THE UNIT SHOWS OFFLINE ON THE PLATFORM. WHAT COULD BE THE PROBLEM?

kula

Hello, dear LockroomTechnical ,

Please provide us login, unit ID, screenshot of the device configuration (SMS commands and device’s answers)and link to this topic to support@gps-trace.com, then we will try to check and help.