Hello GPS Trace Team Is the Concox JM-LL01 tracker to be included in the system ? If yes, when ? Or is there another device type that works for this device ?

MatthiasB Hello. First try to configure your tracker as Concox device. When you create a unit you should specify in the settings: Device Category - Hardware Device Type - Concox After that, you can find in the unit menu - Settings - Common settings port and server on which you need to configure the tracker. If your tracker supports DNS server format, then configure the tracker to: Server Host - 36373.flespi.gw Port - 21546 If your tracker only supports the IP server format (to see it, click the IP button next to the server value), configure the tracker to: Server Host - 193.193.165.37 Port - 21546 Write us back about the results.

hello dapi, thank you for the response :-) First in the ruhavik application I deleted the device, I did tests before. Then I created a new device with exactly the settings you wrote. The ID is correctly configured to the device IMEI. The tracker is configured as.. command server,<pw># –> SERVER,1,36373.flespi.gw,21546 1 means set with domain name is in Tracking Mode with 30 minutes report interval of GPS data tracking, when standing still. command mode –> MODE:1,60,1800 the url command delivers a valid position. From time to time I can see the following in ruhavik. Online Number of satellites: First message time: No info Last message time: No info Last positional message time: No info Message storage: - Forecast days ttl: Between it’s Offline When I moved the device, I got SMS via the phone and saw the green Online State in ruhavik, but not more. The time of this drop off and vibration event was 23.10.2020 CEST 19:41 UTC 17:41 edit 25.10.2020 Now the tracker is in its winter quarters, in sleeping MODE:2,09:00,12. That means it wakes up twice a day 09:00 CET and 21:00 CET and sends some data as I can see in the telco provider data usage log.

MatthiasB Hello! Sorry for the long wait for an answer. Our specialists checked the data. For this model of tracker, the new data was set so it was not parsed and error was arisen. At this moment, changes have been made and everything should be work. Also, this model was added to the list of devices. Now you can choose in the settings: Device Category - Hardware Device Type - Concox JM-LL01

Hello Ashe I can confirm, your platform is working now with my Concox JM-LL01. Great work and in my opinion fast. Congratulation and thanks to you and the team ! Regards, Matthias

MatthiasB Hello! We are glad that at the moment everything works for you!) If you have any questions about the application or suggestions for improving it, please write to us.

please can you help me.. I buy a GPS 4g JM-LL01 and I use a SIM card with all the Gs anable 4g 3g 2g so I try to set it up so I send SMS commands to the device but not reply back to confirm the command so on the tracksolid platform is working ok but not reply to my commands

TelisValaoritis Hello! How did you configure the tracker to the required port and server for data transfer without using commands? Please tell us about the problem in more detail. Do you want to connect this tracker to the Ruhavik application?

I am using the tracksolid application and I try to set up the JM-LL01 via SMS commands via my mobile phone.so I send first the APN,CYTAMOBILE# to start and the device not reply but accept the command I send SOS,A,99683065# To the device and still accepting the command but not reply the only time who send me SMS to my mobile is alerts when is vibrate or move ..I don’t know I use many GPS from this company and is ok I know how to do the settings .. thanks for helping..the Chinese girl from the AliExpress jimm company not help

TelisValaoritis Hello! First of all, I should note that this forum is intended for users of the Ruhavik application. Does the tracker respond to commands such as APN# or SERVER# according to the manufacturer’s instructions ( https://www.iconcox.com/uploads/soft/200826/1-200R6151056.pdf )? If it answers, then please check that its answers. If not please check commands, in accordance with the manufacturer’s instructions (information in the PWDSW command) , if a password is enabled, then it must be specified as the first parameter. That is, in your command, perhaps after the name of the command, you first need to specify the password and then only the APN separated by commas. Also you can check the level of 4G communication, maybe in the place where you are there are small ones with a signal level, for example?

No the device not respond to any command ..the only time who responds is when is alerts notification .how I will find out about the 4g strength in my area ?? I download the Ruhavic and I will try it. So maybe I must create a password for the device via Bluetooth iPhone first and then start to send SMS settings ??

Concox JM-LL01

Parsley

Hello, I have bought Concox JM-LL01 tracker and have trouble configure it and I don’t have all available commands and explanations. Could you help me? Can you provide me full list of commands with explanations?

Furthermore, i have few questions if you can help me:

I set the mode,1,60,360# so that it sends the position every 60 seconds, but when it starts, it reports every few seconds? Vibration senalm is off.
What this commands does and how to use it:
staticrep#
sensor#
timer#
How can you listen to the environment around the tracker? Is it possible to configure it through bluetooth or/and with AT commands?

Thank you.

kula

Dear Parsley

Sorry, we don’t have GPRS commands for this device. That is, technically this functionality will work, but we do not know the command syntax itself.
We only have an example payload (syntax) of the command:
f.e. command to Cut OFF petrol:
{“payload”:“RELAY,1#”}

For command syntax, we recommend that you contact the manufacturer directly. They will be able to provide you with the information you need. Also, if you receive this information, we will be glad if you share it on our forum.

Now for your questions:

This question can only be answered by the manufacturer. Most likely it is in the firmware, or in some additional setting. From our side, we only receive data, calculate it and display it.
From this list, only the timer# command is familiar to us.
We could not find the rest of the commands either in the official manuals or anywhere else.
Info about staticrep# command you can find here by the link. https://pdfcoffee.com/concox-gps-tracker-ob22commandsv10-pdf-free.html
Also there you will find a timer# command explanation.

Unfortunately we didn’t find any info about sensor# command.

In this case you can listen the environment only via call to the tracker(to SIM card). If this tracker supports such function(have a mic and software for this inside).

If you have any additional questions about the application or you will find information, just write there.

mazza63

TelisValaoritis
Good morning Telis, I have your same problem with a VL04, I also receive sms for movement or vibration alert but I don’t receive any other message after sending commands via sms. Did you solve it in any way that can help me? Thank you!!

kuta

Dear mazza63

If your tracker does not respond to SMS commands, you need to check the following on the tracker side:

SIM card operation: balance, limits, mobile network coverage.
Does the tracker have enough charge to work (sending response messages).
Tracker operation mode (whether it went into sleep mode, etc.)
Сorrectness of the tracker connection to the vehicle.

In case these steps do not solve the problem, please provide us login, unit ID, screenshot of the device configuration (SMS commands and device’s answers) and link to this topic to support@gps-trace.com, then we will try to check and help."

« Previous Page