I got my device online in the GPS Trace Software (green light, online), but it doesnt send any data: Last message time: No Info, Last pos. message time: No Info, Number of satelites: No Info. Right now my GPRS setup is like this: Protocol: Auto Event Report GPRS Mode0, GPRS Report time 0, GPS Log Interval (secs) 1, GPRS Interal 1×1 secs, Heartbeat location Time (mins) 2, GPRS Interval (Roam) 0 ×1secs What can I check to make it run? best regards Jens

[19/11/2019 16:56:00] 300: device connected { event_code : 300 event_origin : “gw/devices/444671″ event_text : “178.232.57.153/connected” id : 444671 ident : “863921030922069″ origin_id : 444671 origin_type : 11 source : “178.232.57.153″ timestamp : 1574178960.212467 transport : “tcp” }

Meitrack P99L (LTE)

Jens

[19/11/2019 16:54:19] 301: device disconnected (data parsing error (see log details))
{
close_code : 6
duration : 156
error_text : “[meitrack:88:5, input 000338 27 000001] pvm_exec_input_search: can’t search text ‘*’”
event_code : 301
event_origin : “gw/devices/444671″
event_text : “178.232.201.143/disconnected”
id : 444671
ident : “863921030922069″
msgs : 0
origin_id : 444671
origin_type : 11
recv : 29124
send : 0
source : “178.232.201.143”
timestamp : 1574178859.762165
transport : “tcp”
}

chol

Jens
We check it.

NadzeyaMikhailava

Hey Jens !
I investigated the raw data from your device.
Unfortunately your device sends malformed packets that are not comply with the P99G/P99L documentation available on the official Meitrack site: www.meitrack.com/download-center
Thus, it’s impossible to get this device working with GPS-Trace (unless you provide us with a correct doc)
Sorry for this.

Jens

NadzeyaMikhailava

Hei Nadzeya,
could you give me one example, which is more specific? What did you expect to read, what was send?

Do you suggest its a faulty product or a different “desgin”?

best regards

Jens

NadzeyaMikhailava

Jens
Here you can find raw data packets that your device sent us: https://cdn.flespi.io/file/5DD7DA9B00000E926E035F7A31D99F621DDBDD2D7D4A7C5D
Actual protocol specification for P99G/P99L devices you find here (ask Meitrack to provide you with a password) www.meitrack.com/download-center
If you will perform per-byte analysis of the raw packets, you will see that they violate CCE command type protocol.

Jens

Hy,Nadzeya
I contacted my reseller to show me his mapping system. Its called TripView / Tripshare and works with my P99L device.

The design and functionality of your system looks much more specific and suites my needs perfectly -TripView does not.

Is there any way we can get Meitrack P99L run on GPS-Trace?

best regards!

Jens

ashe

Hello!
Without the specification of the protocol according to which exactly your model of tracker works, we will not be able to help you

Jens

Hy,
is there any news on the Meitrack P99L?
best regards Jens

ashe

Jens Hello!
Unfortunately, at the moment, nothing has changed, we don’t have the specification of the protocol according to which exactly your model of tracker works, so we will not be able to help you

Jens

I have found the GPRS protocol in the download center, how can I upload it?

best regards Jens

dapi

Jens Hello.
Could you send the mentioned protocol to us via support@gps-trace.com, we cannot give guarantees but will examine it.

Jens

Email is sent