Hi all, First of all, I have seen advice https://forum.gps-trace.com/d/340-how-to-connect-trackers-of-types-gt06-gt06n-gt02-gt02a-tk110-and-etc . Following seller description the device is GT02A, but if I use settings IP/port for the device, it is still offline in application. I have tried also settings for TK110, GT06N, but it doesn’t work properly. Inside the device I can see TK006 module (maybe that’s important). Where I’ll find information what protocol (Xexun, Coban, Concox) my device use. Does anyone know what settings to use? I will be grateful for any advice. I add, that on Dyegoo platform the device works well.

Hello! You can try the device (Hardware - Concox) and configure on the tracker the appropriate port and server, as well as the timezone 0 (UTC). Then you can try to see the data that came in Toolbox-Messages.

ashe Thanks for reply. Yesterday I solved the problem. I used following settings: ID: 11 last digits of IMEI with leading 0, Device category: Hardware, Device type: Resiont TK110, Server IP: 193.193.165.37, Port: 32329, as well as the timezone 0 (UTC).

GT02/GT02A configuration issue

TrevorDRozario

I am having the same problem but your solution does not seem to work.
on the old system my GT02A was working on Resiont TK110
I have set up my system using the above settings (server and port settings) but it is still not visible on the platform.
any suggestions?

ashe

Hello!
Have you tried the other configuration options for similar devices described here https://forum.gps-trace.com/d/340-how-to-connect-trackers-of-types-gt06-gt06n-gt02-gt02a-tk110-and-etc ?

TrevorDRozario

Yes tried all the other options. Also now I find that the coming when queried by sms is not correct - it shows 00-09-22 14:30:00 even after I tried setting GMT 0. Any suggestions?

TrevorDRozario

I mean the date coming when queried….

ashe

Hello!
Perhaps you have encountered the following problem https://forum.gps-trace.com/d/42-gps-rollover

TrevorDRozario

Looks like a rollover problem - is there any solution?

ashe

Hello!
You need to contact the manufacturer or seller, since you probably need a new firmware for the tracker

TrevorDRozario

Thanks a lot - unable to contact the manufacturer and seller has no idea so most probably I will have to dispose of this tracker.

ashe

Try to search for information on the Internet, maybe there may be some information about this on the manufacturer’s website.

TrevorDRozario

Searched but there was no information on this subject.

Lamkram

Hello, my device is a GT02 V2.3 (written inside). I can’t see my device. Tried several options. Does anybody have the right options for me? Greatful.

ashe

Lamkram Hello!
Have you tried all the protocols and settings from here https://forum.gps-trace.com/d/340-how-to-connect-trackers-of-types-gt06-gt06n-gt02-gt02a-tk110-and-etc?

Lamkram

ashe Yes I’ve read all of that and tried it also.

Lamkram

Yes I’ve read all of that and tried it also.

CercoShockDoze

HI FRIEND I am based in Argentina and I ned UN LINK a GT02 from the main China factory http://www.gps110.org/ I need to traslate this AVL to another Argentina plataform ,, But I can see de EMEI on China http://www.gps110.org/ And very resistant to migrate Thanks Oscar fronm ARgentinean Security company

sheiksalman

I am ready to pay them… Who will solve my issue…this is my contact number 7019774562

freaktzon

thanks, it works! ! !

freaktzon

Pass thanks, it works! !

jackson

Pass Obrigado pela dica, meu caso deu certo, ja tinha dois dias tentado e nao conseguia…
Meu erro era na ao colocar o numero de IMEI na plantaforma ai qd eu coloquei o, 0 + 11 utimos digitos do IMEI do dispositivo deu certo.
MEU DISPOSITIVO; DYEGOO GT02A

getuliosrj

jackson Vlw..depois de dois dias tentando tbm..entrei nesse forum e em 2 minutos resolvi..kkkk..tava errando no modelo e no zero antes dos 11 numeros do IMEI..agora tá blzinha..vlw.

GautamReddy

Hi is ruhavik a life time free software to track the device or it’s just trail version ???

dapi

GautamReddy Hello.
Ruhavik is a full-fledged application with no time limit, the version with current functionality is free.