GT02A / Not working
Why to set timezone…Now the tracker show me right time…
Now everything works fine…
- Edited
hi,
not sure cause after migration or bug on my device, but it worked before
Server IP - 193.193.165.37 Port - 32329
ID - 0+11 last digits of IMEI /027042854331/
Device Category - Hardware
Device Type - Resiont TK110
it appear online but not displaying info, gps or location
xilense Hello!
You can see if your tracker sends messages in the unit menu - Tools - Toolbox.
In the message section you can see the messages, if they arrived. In the logs section, you can see if the tracker is connected and if it is disconnected, for what reason (you can simply click on the log)
Perhaps you have not configured the frequency of data transfer (for some trackers, this must be done additionally via SMS). Or maybe your timezone is incorrectly configured. Please check that it is set to 0 (UTC)
Assalamuagaleikum,
You are absolutelly right about settings for GT02A:
Server IP - 193.193.165.37 Port - 32329
ID - 0+11 last digits of IMEI /027542154458/
Device Category - Hardware
Device Type - Resiont TK110
ashe thanks for the answer!
it says disconnected and connected repeatedly as shown on screenshot
here is disconnected log
[20/03/2020 01:42:16] 301: device disconnected (Current connection closed because of ident collision: device has opened another connection to the channel without closing first one. It may happen because of device firmware bug or by an unstable connectivity provider. In general, this happens to plenty of devices and usually can be ignored.)
and “Messages not found” is this mean my device didn’t send any data?
but GSM and GPS light are normal
MrRuslan Hello!
You have tried all types of devices and settings from here https://forum.gps-trace.com/d/340-how-to-connect-trackers-of-types-gt06-gt06n-gt02-gt02a-tk110-and-etc (Concox, Xexun, Coban, id with 15 and 12 numbers)?
please help me, i have gt02a and i want SMS command for cut oil engine
habibikabib Hello!
Please specify, do you want this command to be sent from the application, or do you want to know the command text directly?
I made it.
I choose Hardware and Xenun.
Voila, it is working.
- Edited
Hi I’m a new user. Please can anyone help I have just installed a GT02A in my car. I can send an sms to get location but I can’t track it live in the Dyegoo app, it says “ Acc:off : status inactivated”. The SIM card has data on it ok. Any help will be fantastic as I’m totally stumped. Thanks.
I have now tried to setup the GT02A in the Trace App. I have sent the Server host and port to the device and got the ok msg back but it’s not showing up in the app. Any help would be very much appreciated as I have spent many hours trying but with no success. TIA
- Edited
GrantWiddowson Hello!
Please try to use all possible settings listed here https://forum.gps-trace.com/d/340-how-to-connect-trackers-of-types-gt06-gt06n-gt02-gt02a-tk110-and-etc
If it doesn’t help then please try to identify your tracker on id.wialon.net as one of the devices Xexun, Coban, Concox
If your tracker is determined, take a screenshot, write down the name of the model of the tracker and the identified ID (may coincide with the IMEI, may be part of it with zero or without).
After that, return to the application in the unit settings (unit menu - Settings - Common Settings), specify the determined model and ID. After that, configure the tracker on the defined server and port.
Regarding the server, you can also read more information here https://forum.gps-trace.com/d/586-ip-and-dns-server-formats-in-the-application
Also, please check that everything is fine with the SIM card or chip that you use with the tracker, that it has enough funds and that the data transfer limits are not exceeded. Also, please make sure that you have configured the APN on the tracker in accordance with the provider data.
Thanks for your reply. I will have a look at it.
ashe I can’t find the tracker on wialon, it was purchased from eBay as a GT102A and the ID is 280424339107, nothing comes up on google for that ID.
ashe I have a green flashing LED that the manual says is GSM initialising