what is the difference between legacy and hardware I have a gt06 I will put it tk 103b does not work

  • chol replied to this.

    RichardsonAugusto
    Difference in protocol parsing. Hardware - parsing on the new platform, Legacy - on the old platform.

      4 days later

      Hello. Since 12.12.2019, the tracker began to incorrectly send coordinates,
      earlier it was possible to configure any interval via SMS command “fix030s005n123456”
      sending data. Now the data is being received, according to a scheme I do not understand, and this cannot be changed in any way.
      Still not working, sending data by distance traveled. through which the device will send data
      (for example, “distance123456 0050” sets the device to send additional data via
      every 50 meters). Thanks.

      7 days later
      a month later
      2 months later

      ola configuar coban 303 .qual ip novo .mudou 11625.flespi.gw ?
      nao to conseguindo mais ,,,

      NenelLopes Hello!
      The IP address of the server has not changed, just at the moment it is displayed in DNS format. After the update, it will be displayed in both formats.
      You have a problem with a unit that previously worked and now does not work?
      Or you can not configure a new unit?

        7 days later

        Boa noite ,também não estou conseguindo subir no aplicativo russo.
        Meu RASTREADOR é TK303 , envio o comando assim:
        Adminip123456 11625.flespi.gw 28961
        Alguém pode me ajudar.
        O rastreador é novo e nunca cadastrei em plataforma nenhuma.

        • ashe replied to this.

          clodoaldobrando Hello!
          If you have a problem with the server on the tracker, then you can try the IP format of the server.
          And the latest version of Ruhavik in unit menu - Settings - Common Settings you can see the server in two forms - DNS and IP. To see the IP form, click the IP next to the server display.
          Also see information on setting up similar devices here https://forum.gps-trace.com/d/340-how-to-connect-trackers-of-types-gt06-gt06n-gt02-gt02a-tk110-and-etc

            2 months later

            meu rastreador TK103 parou de rastream de 23/06/20. Ele está configurado como coban GPS103-b e estava usando a porta 28961, porém vi no common settings e aparece a porta 21931 para o GPS103-b. Enviei comando mudando para esta nova porta, mas continua não funcionando.
            Algém pode me ajudar?

            • ashe replied to this.

              OSBY Hello!
              Please configure your unit and tracker on such settings that were until 23.06.2020, since it worked successfully and please use the IP format instead of the DNS server format:
              Server Host - 193.193.165.37
              You can see in the logs for that day in the Toolbox (unit menu - Tools - Toolbox - section with logs at the top). That your tracker disconnected and no longer connected.
              As an option, please try to check the SIM card or chip of the tracker, in particular, check whether the data transfer limits not exceeded (this sometimes happens with users), and also try to check the operation of the tracker itself (request information directly from it, for example, using an SMS command).

                2 months later

                Hola buena noche y configurado el rasteador cobran 303i bajo los parámetros especificado en configuración , pero no ha sido posible que reporte al verificar la información en el check123456 me arroja lo siguiente.Power: ON
                Bat: 100%
                GPRS: ON
                GPS: ON
                ACC: OFF
                Door: OFF
                GSM: 17
                Oil: 0.00%
                APN: lte.avantel.com.co,,;
                IP: 33113.0.0.0:0
                Arm: OFF
                Veo que el servidor no lo muestra correctamente, me podrían ayudar a configurarlo.
                adminip123456 33113.flespi.gw 29737
                De antemano gracias por la ayuda suministrada a mí solicitud.

                • dapi replied to this.

                  RamonAscanio Hello.
                  Unfortunately we cannot provide support in configuring devices since all the trackers have different settings and they can vary greatly. We can help you with the application settings, trackers type definition, but not its configuration.
                  Given that, please see the instruction for your tracker for the commands to configure it.
                  If you need help concerning other issues except the commands please send your request via support@gps-trace.com and mention your login, tracker IMEI and model, you can also enclose screenshots describing the problem.

                    RamonAscanio
                    Also please note that there could be two server formats IP and DNS: you can try to indicate IP server format instead of DNS format (33113.flespi.gw), to see them click the IP button next to the server value in the unit settings (Unit menu - Settings - Common Settings) in your account.