Hello, i think this device use id instead Imei. anyway i can’t retrive data from device in Ruhavik. can you help me? all set, server and apn. Sms works fine and all commando for setup was confirmed.

Hello, Snefru , Just write us to support@gps-trace.com indicating login, unit ID and device type, then we can check and try to resolve your issue.

rost So micodus MV710 is not working. if i set the micodus ip, all working fine, wher putting your host it stop work, but smsm working fine.

Hello, Snefru , As we rechecked such device is not integrated in our system yet. So we asked you by email to check your device via id.wialon.net Since manufacturers from China often copy the protocol of devices, it is likely that your device can be used under a different type of equipment, so try to identify the device anyway. If the device cannot be identified, that is, the device is not found in the list, then write to us about it by mail, we will try to double-check through our debug server. Remember, everything can be solved, if it doesn’t work out with the current forces, we will integrate this device in the next couple of weeks.

i hope you can add it I tried also thru flespi account, thousand tests. atried your suggested but nothing. i have 10 device on my vehicles and i really like your system. I hope you add them as soon as possible.

Hello, Snefru , Today, we additionally contacted to manufacturer, and will initiate the integration process on this week. We’ll try to get it done as soon as possible.

hello! any news from manufacturer? 😁

Snefru Hello! We have transferred data from manufacturer to our specialists for the integration of this device and some other devices of this manufacturer. We will announce when new devices are integrated. Thank you for waiting.

Micodus MV710

Snefru

ashe can you suggest me if i can start to install this devices on vehicles?

i don’t want do too many in advance

rost

Hello, Snefru ,

We will notify you, when this devices will be integrated.
Please wait. We are currently working on their integration. The process took a little longer, but soon we will complete the integration and let you know, we will also notify you in a separate post on the forum.

rost

Hello, Snefru ,

Yesterday, we integrated Micodus MV710 device.
So, you can now test it and use.

If any issues, do not hesitate to write us!

Snefru

rost Perfect! it works.

just a question, how can i send cut-off command for fuel?

rost

Hello,

We have not yet integrated commands for this device.
But we are working on this, please wait, we will notify when commands will be integrated.

Snefru

rost hello any news for command integration?

actually the alarms is always a generic “alarm sent” without detail or info

Snefru

Snefru please, any news one year later?

up!

kuta

Hello Snefru ,
For the Micodus MV710 tracker, we have already integrated the ability to create custom commands.

But since most of this type of device requires a tracker ID, we cannot create unified commands that would suit all users.

At the same time, now you have the opportunity through SetBox or Commands Panel to configure the commands you need.

If you have any additional questions, please let us know we will try to help you.

Snefru

can you give me an example for do it?

kuta

Dear Snefru
We described the possibilities of creating commands through the Commands Panel in our blog at the link https://gps-trace.com/en/blog/commands-panel-save-time .
Please note that this feature is available only for users with a premium subscription.
Management through SetBox is available to all users.
But in both cases, you need to know the command syntax (to clarify it, it is better to contact the tracker manufacturer directly). Accordingly, the list of commands that can be created depends on the model and manufacturer of the tracker.

If you have any additional questions, please let us know we will try to help you.

Evgeny

Добрый день. У меня микодус 720. Установлена программа на телефон. Устройство там не отображается

rost

Evgeny Hello,

As we see, you are using a third-party application with which we have no connection.
For support regarding this application, please contact the application developer directly.

The Micodus MV720 device can be used in our Ruhavik application completely free of charge.
If you are interested in our application, check out the “Step-by-step guide” here. –> https://gps-trace.com/how-to-start

If you have any questions, write to us at support@gps-trace.com

« Previous Page