Hello,

i think this device use id instead Imei.

anyway i can’t retrive data from device in Ruhavik.

can you help me?
all set, server and apn.
Sms works fine and all commando for setup was confirmed.

  • rost replied to this.

    rost So micodus MV710 is not working.

    if i set the micodus ip, all working fine, wher putting your host it stop work, but smsm working fine.

    • rost replied to this.

      Hello, Snefru ,

      As we rechecked such device is not integrated in our system yet.
      So we asked you by email to check your device via id.wialon.net

      Since manufacturers from China often copy the protocol of devices, it is likely that your device can be used under a different type of equipment, so try to identify the device anyway.

      If the device cannot be identified, that is, the device is not found in the list, then write to us about it by mail, we will try to double-check through our debug server.

      Remember, everything can be solved, if it doesn’t work out with the current forces, we will integrate this device in the next couple of weeks.

      i hope you can add it

      I tried also thru flespi account, thousand tests.
      atried your suggested but nothing.

      i have 10 device on my vehicles and i really like your system.
      I hope you add them as soon as possible.

      • rost replied to this.

        Hello, Snefru ,

        Today, we additionally contacted to manufacturer, and will initiate the integration process on this week. We’ll try to get it done as soon as possible.

        4 days later

        hello! any news from manufacturer?

        😁

        • ashe replied to this.

          Snefru Hello!
          We have transferred data from manufacturer to our specialists for the integration of this device and some other devices of this manufacturer.
          We will announce when new devices are integrated.
          Thank you for waiting.

            10 days later

            ashe can you suggest me if i can start to install this devices on vehicles?

            i don’t want do too many in advance

            • rost replied to this.

              Hello, Snefru ,

              We will notify you, when this devices will be integrated.
              Please wait. We are currently working on their integration. The process took a little longer, but soon we will complete the integration and let you know, we will also notify you in a separate post on the forum.

              Hello, Snefru ,

              Yesterday, we integrated Micodus MV710 device.
              So, you can now test it and use.

              If any issues, do not hesitate to write us!

                rost Perfect! it works.

                just a question, how can i send cut-off command for fuel?

                Hello,

                We have not yet integrated commands for this device.
                But we are working on this, please wait, we will notify when commands will be integrated.

                  a month later

                  rost hello any news for command integration?

                  actually the alarms is always a generic “alarm sent” without detail or info

                    a year later

                    Hello Snefru ,
                    For the Micodus MV710 tracker, we have already integrated the ability to create custom commands.

                    But since most of this type of device requires a tracker ID, we cannot create unified commands that would suit all users.

                    At the same time, now you have the opportunity through SetBox or Commands Panel to configure the commands you need.

                    If you have any additional questions, please let us know we will try to help you.

                    21 days later

                    can you give me an example for do it?

                    • kuta replied to this.

                      Dear Snefru
                      We described the possibilities of creating commands through the Commands Panel in our blog at the link https://gps-trace.com/en/blog/commands-panel-save-time .
                      Please note that this feature is available only for users with a premium subscription.
                      Management through SetBox is available to all users.
                      But in both cases, you need to know the command syntax (to clarify it, it is better to contact the tracker manufacturer directly). Accordingly, the list of commands that can be created depends on the model and manufacturer of the tracker.

                      If you have any additional questions, please let us know we will try to help you.

                      10 months later

                      Добрый день. У меня микодус 720. Установлена программа на телефон. Устройство там не отображается

                      • rost replied to this.