Hi, is there any option to show animation(move slowly to other position) while vehicle moving and data sending interval is more then one minute.

  • ashe replied to this.

    johnAlex Hello!
    The application has the ability to display data that comes from the tracker.
    At the moment, the application has a mode of following an unit on the map (a button in the form of an arrow on the unit card and on the map). When the mode is on, the arrow is highlighted in yellow.
    Could you clarify, would you like the unit to move somewhere before the data has been received within a minute? Or would you like to see where the unit is moving before during tracking mode?

      3 months later

      Buenas noches, cual es el intervalo en el que se actualiza la posición en la aplicación? Actualmente se actualiza aproximadamente en un minuto.

      • rost replied to this.

        Hello, fcjbonguito ,

        In the case of our system and application, it is important to understand that the data rate depends entirely on your tracker.
        That is, how often your tracker will send data, the system will also receive data.

        Thus, if the data in the application is updated 1 time per minute, then your device sends it that way.
        If you want the data to be updated more often, then you need to configure the frequency of sending data on your tracker. For example, if you set the frequency of sending data on the device to 2 seconds, then the system will receive 1 message every 2 seconds.

        Check the configuration of your device, most likely it will be enough to reconfigure the device to send data more often.

        If you have a problem with device configuration it is better to contact the device manufacturer or dealer for the tracker settings.
        Also, information on settings can be found in the instructions for the device.