configure tk103b

maximecordonnier

Hello,

I bought a TK103b from Rakuten this one.
In the userguide provided in the package they use http://www.gps110.org and it works, i can find my GPS location
The ip is : 103.110.152.62 and port 7018

But the interface is weird I would like to try gps-trace, but I can’t see my device online, I tried to add with full IMEI 15 digits, also tried IMEI 11 with 0 in prefix nothing work.
The setup of the device was Legacy and Cantrack TK103B, this one is good for me ?

I also tried to view my device on http://id.wialon.net with ip 193.193.165.167 and port 21583, but nothing appear !

Whats wrong ? I guess my GPRS works cause it worked on their platform…

Thank you for help

ashe

maximecordonnier Hello!
You can try all devices from here https://forum.gps-trace.com/d/340-how-to-connect-trackers-of-types-gt06-gt06n-gt02-gt02a-tk110-and-etc
Also, when you configure the tracker, by default the DNS server format is indicated in the application. You can try to configure on the IP server format, as your tracker may not support the DNS format. You can read more about it here https://forum.gps-trace.com/d/586-ip-and-dns-server-formats-in-the-application

maximecordonnier

Hello ashe,

Thank you for your reply, on your app when I select Legacy Tk103b it only propose IP and not DNS, but yes I tried both…
I also followed the instructions on the post you linked, by setting the time zone to 0 for example… Without success.

How to konw if my tracker is a Xexun or Coban type ?

ashe

maximecordonnier Hello!
Please try to identify your tracker on id.wialon.net as one of the devices Xexun, Coban, Concox
If your tracker is determined, take a screenshot, write down the name of the model of the tracker and the identified ID (may coincide with the IMEI, may be part of it with zero or no)
After that, return to the application in the unit settings (unit menu - Settings - Common Settings), specify the determined model and ID. After that, configure the tracker on the defined server and port.
Regarding the server, you can also read more information here https://forum.gps-trace.com/d/586-ip-and-dns-server-formats-in-the-application

maximecordonnier

ashe Hello

I found my device with Concox protocol on port 20859 !
Concox GT06N 20859 352672102010824

Which device i should select on gps-trace ? and with 11 digits IMEI or full 15 digits ?
Thank you

maximecordonnier

@ashe
I reply to my own answer, I configured my tracker with GT06N on gps-trace, and now my tracker is Online !

Success !

For future users, it may good to add on your tutorial pages, the distinct between each protocol ?
Maybe with each port number ?

Thanks again for your help !

ashe

maximecordonnier Hello!
We are glad that you were able to connect to our application!
Thank you for your suggestions, we will consider the possibility of their implementation.

agrandado

I have the same problem with the platform, I tried several ports and it does not show me location on the map. I changed the Concox GT06N 20859 the same one that maximecordonnier tried but it doesn’t work for me. I would like to know if you can help me to configure and track my car online and in real time
Im from Costa Rica
image1 https://www.photobox.co.uk/my/photo/full?photo_id=503120200282
iamge2 https://www.photobox.co.uk/my/photo/full?photo_id=503120201043

i saw the green point but nothing else ..

dapi

agrandado Dear user,
Unfortunately, we do not see any information from the attached screenshots because we can not open them.
Please try to identify your tracker on id.wialon.net as one of the devices Xexun, Coban, Concox.
If your tracker is determined, take a screenshot, write down the name of the model of the tracker and the identified ID (may coincide with the IMEI, may be part of it with zero or no)
After that, return to the application in the unit settings (unit menu - Settings - Common Settings), specify the determined model and ID. After that, configure the tracker on the defined server and port.
If you need more detailed assistance please send your request via support@gps-trace.com and mention your login, tracker IMEI and model.

agrandado

dapi Thanks for your help and replay my issue.
I tried to use id.wialon.net but i can´t finded it . and i never knowed what brand or model is my gps i just suppost by google information and also images
i did some changes and set up and tried with XEXUN TK103-2 IP 193.193.165.37 port 26731 and the gray point change to yellow one, some times changed to green i think is working or still online
When i vissit the android app i can´t saw the real position because in the map show in other place . i want to see it in real time on the android app

OK i think i did it !!!!! amazin , i need to create some active URL and put how many days i want to share the ubication in real time … how is the maximun time ?
How can arm and disarm my car using the app ???
How delete messages from app or web site??

MiguelMarinhodeSouza

Gentlemen:
I have a Coban TK103B tracker and I would like to get all the configuration for this platform.
Appreciate.
Miguel.

MiguelMarinhodeSouza

Sir:

I kindly ask you to inform the configuration for Coban’s TK103B for this platform (Orange).
I know the first command is: begin123456. What are the rest?
Grateful.
Miguel M. Souza

agrandado

MiguelMarinhodeSouza
https://localizadorgpstracker.com.mx/comprar/manual-tk-103-2/
there is the sms command

MiguelMarinhodeSouza

Sir:

I kindly ask you to inform the configuration for Coban’s TK103B for this platform (Orange).
I know the first command is: begin123456. What are the rest?
Grateful.
Miguel M. Souza

MiguelMarinhodeSouza

Sir:

I kindly ask you to inform the configuration for Coban’s TK103B for this platform (Orange).
I know the first command is: begin123456. What are the rest?
Grateful.
Miguel M. Souza

dapi

MiguelMarinhodeSouza
Hello.
Perhaps you mean the tracker Coban GPS103-B?
In this case when you create a unit you should specify in the settings:
Device Category - Hardware
Device Type - Coban GPS103-B
After that if your tracker supports DNS server format, then configure the tracker to:
Server Host - 23825.flespi.gw
Port - 21931
If your tracker only supports the IP server format (to see it, click the IP button next to the server value), configure the tracker to:
Server Host - 193.193.165.37
Port – 21931
If your request is related to the commands for tracker’s configuration – please see the instruction for your tracker.

dapi

agrandado
Hello.
As far as we understood your problem has been resolved and your tracker is identified now.
As to your questions, the information about trips is stored for one year or until the storage size is exceeded (50 MB), after that the old data will be deleted and the new data will be recorded as received automatically. You can delete the previous data by deleting a particular unit and create it again, but then all the data related to this unit will be deleted as well.
About the question how you can arm/disarm your car – you can see the commands that you can send to your tracker in the Unit menu – Tools – Setbox. In case your tracker has some commands that you need but you can’t find them in Setbox then please write to us about them and describe the commands and their functionality in details.
The maximum time you can share your location by sharing an active link is 1 year. Also you can delete the link any time.

agrandado

this is the setbox but is very hard to understand this plataform . i dont know nothing of that .. tell me if you can see the imagen
i can send SMS to close or open the doors

dapi

agrandado Hello.
We see the enclosed image but this is a Toolbox section in the screenshot (Unit menu – Tools – Toolbox) where you can see information your tracker is sending. If you would like to configure some commands via Setbox then please choose Unit menu – Tools – Setbox and an appropriate command if there is such a command for your device type. Please note that Setbox is not available for the devices of Legacy category.

dapi

agrandado If there is no command that you need in Setbox, but at the same time it is supported by your tracker you can write to us about this command in more details.
When you send commands through Setbox you should enter the necessary parameters and click the blue arrow symbol to send the settings. After that you should not reset the settings because otherwise all settings will be cleared.
According to data in your Toolbox (Unit menu – Tools – Toolbox) we see that you have sent timezone setting and apparently after that you have chosen the command to reset all the settings including timezone (these messages are marked with red in logs). Now in the messages section you can see a kind of mistake – timestamp messages have the wrong date and time (marked with red) and are much less than server.timestamp values – the time when messages come to the server.
You can try to reset your tracker and configure its parameters again.

agrandado

dapi Thanks for you replay
i have other question How can i See the real time status of my car?. Because i active the realtime in the app for 12days but i can see the movements of the car, just i see the routes after turn off the car , the last position is shown but doesn’t show in real time.
example: i use the car and then open the app in same time and doesn’t happen nothing. When i turn off the car in few seconds the position change in the map and do not see the movement time real

thanks. for some help!!
(have spanish support ??)