Jump to Africa

MichalKecsks

Hi,

I have a tracker from Quecling, GL200. When starting track, my position jump near to Africa, then back to real place and works normaly. What is the problem? I think the same problem is when lost GPS signal. It is possible fix this problem? I had the same configuration in old orange system, and there system worked fine.
Thank you for your response.
Michael

ashe

MichalKecsks Hello!
Most likely this is due to the fact that sometimes trackers send incorrect coordinates, you can check this in the Toolbox (unit menu - Settings - Toolbox - at the bottom there is a section with messages).
Unfortunately, at the moment we are not filtering this in any way. We plan to do this in the future.

MichalKecsks

Thank you for quick response.
Yes, in toolbox are coordinstes 0,0.
Im waiting upgrade, when filtering will by possible.
By.

ashe

norb3 MichalKecsks
Hello!
Thank you for informing us of the problem.
We will work on introducing filtering of incorrect data.

norb3

The same problem to me. Queclink GV320
Please implement such a feature into the next release. Tnx

ongatarongai

HELLO ANY SMS FORMART FOR THIS GPS TRACKER QUECLICK GV320

kuta

Dear ongatarongai

As far as we know, Queclink trackers are usually configured using a special configurator provided by the tracker manufacturer - Manage Tool.

Unfortunately, we do not have instructions for the tracker specifically QUECLICK GV320
but you can try to use the commands similar to other tracker models from this manufacturer.

For example, the instructions for the Queclink GL300 tracker can be downloaded from the link https://gps-trace.com/ru/devices/queclink-gl300#instructions . Simple commands for setting up the tracker will most likely be the same.

Also as an example, we provide commands for setting up the cv200 tracker (cv200 is a tracker model, so if you are setting up a GV320 tracker, you should replace cv200 with gv320)

APN Setting: AT+GTBSI=cv200,,,,,,,00,,,,,,,FFFF$
Example: AT+GTBSI=cv200,omnitel,omni,omni,,,,30,,,,,,,FFFF$
Server and Port Setting: AT+GTSRI=cv200,0,,1,,0,,0,,0,0,,0,,,FFFF$
Example: AT+GTSRI=cv200,2,,2,185.213.2.30,32008,,0,,5,0,,0,,,FFFF$
Message Frequency: AT+GTFRI=cv200,0,,,,,,,30,,,,0,600,00000000,,,,FFFF$
Example: AT+GTFRI=cv200,1,,,,,,,20,,,,15,60,00000000,,,,FFFF$
Driver Behavior Monitoring: AT+GTHBM=cv200,1,100,,,,10,100,,,,10,30,10,,,,,,,,,,,FFFF$
Accident Detection: AT+GTCRA=cv200,1,15,23,,0,500,500,,1,,1,30,30,FFFF$

We hope this information will help you with setting up the tracker.

ongatarongai

kuta Thank you