Joe Hi. I have a coban tk102 and it sends me data to the platform but the location does not appear on the map.In position valid it puts me: false,and In number of satellites it does not put anything. If i put it to work by sms, it sends the coordinates well.
ashe Joe Hello! You can check what data comes to the application in the Toolbox (unit menu - Tools - Toolbox - message section at the bottom)
Joe Hi. In tool box send me: timestamp, ident, server.timestamp, and etc. The data of : positión.latitude, positión.longitude, position.altitude, position speed nothing comes out.
ashe Joe Hello! If you click on the message in the Toolbox, then an additional window will open and the incoming parameters will be displayed. There is also the ability to configure them to be displayed immediately in the table.
Joe Hi. In the nessage it also makes me:“false”. That may be that the tracker does not send the coordinates? How can i do? Thanks
ashe Joe Hello! If there is no coordinate in the messages, then probably the tracker will not send them. Try to reset the tracker settings and configure it again.
Joe Hi. I reset the tracker whith the “begin” comand. I configure the gps again,I call him and he answers me: lat:42.XXXXXX long:-008.XXXXXX speed:000.0 T:05/04/20 18:54 Bat:20% http://www.wxlxy.com/GPSTracker.aspx?key=354776433697573@3871420.210@-2224560.32 (The coordinates are fine but I modified then) Later I configured it to work wiht the gprs and it comes out online but the coordinates do not come out.
ashe Joe Hello! Unfortunately, we couldn’t see the information you sent via the link. Could you send us your data (login, unit id), as well as screenshots showing the problem? You can send them with a description of the problem to us by email - support@gps-trace.com
