Hello, OlegsRusa
To connect your created unit to the tracker, perform the following actions:
Configure the server and port for data transmission
When the object is created, the application shows the server address (IP or DNS) and the port to which you need to configure the tracker so that the system starts receiving data, processing it and showing it in the application.
Configure timezone - time zone 0 (UTC)
For most trackers, regardless of your location, configure exactly the 0 time zone. In the application, your timezone will be determined from the data of the device (phone or computer) on which you use it.
Configure APN
Configure the APN according to the data of the provider of the SIM card that you use with the tracker. Depending on the provider, it can only be the APN name or the APN username and password.
As soon as you make the necessary settings and your tracker starts sending data to the configured server address and port, you will be able to see it on the map in the application.
You can find the necessary SMS commands to configure your device in the instructions for the tracker. By this link you can find the manual for your device https://www.iconcox.com/support/download.html
If you are unable to connect to our system, please email us support@gps-trace.com , send us your login, object ID, screenshots of your device configuration, and also provide a link to this forum topic.
