equipment is included

borisbnh

What form of tracking equipment is included in the user’s usage platform? I didn’t find this one here and would like to suggest

borisbnh

more information about him:

https://www.nonus.com.br/n4

kuta

Hi! borisbnh
If your tracker isn’t listed in our supported devices, you may still be able to connect it as a clone of a similar device.

To connect a clone tracker:

Identify a similar supported device model
Create a unit using that device type in Legacy category
Configure your tracker with the provided server and port
For detailed instructions on connecting clone devices, please check our guide: Connecting Clones and Non-Integrated GPS Devices

If you need help identifying a compatible device type or have any questions, please email us at support@gps-trace.com with your tracker model details.

borisbnh

From what I’ve researched, it seems to be this one: https://gps-trace.com/en/devices/thingsys-j16#address

And this one would also seem to fit: https://gps-trace.com/en/devices/concox-et25#instructions

I’m not sure, here’s a manual with its features and commands for configuration: https://ajuda.getrak.com.br/hc/article_attachments/33444615916315

Would creating this specific device be bad for you?

borisbnh

Taking advantage of this, it would be possible to create a variant for this equipment: https://gps-trace.com/en/devices/suntech-st8310#address

The new model: https://www.suntechdobrasil.com.br/rastreadores/produto/st8310um-4g

Here are more details on the US website: https://suntechus.com/product/prd_detail?idx=40

kuta

borisbnh
When connecting a clone, it is impossible to say in advance which protocol it will work with. Therefore, we suggest you try to create a unit and connect the device with a different type of device. Please note that after changing the type of device, you may need to redirect the tracker to a new server and port, which will be specified in the Unit settings - Hardware.

borisbnh

I’ll test it with the J16 and Concox.

Regarding the Suntech ST8310, is it possible for you to create a variant of it that has the same protocol and functions, but is smaller?

kuta

borisbnh
It’s not entirely clear what you mean by creating a “variant” of the Suntech ST8310. This specific device is already integrated into our platform with support for its protocol and functions.

Could you please clarify what exactly you have in mind? Are you referring to a different hardware version with the same protocol but smaller physical dimensions, or are you asking about something else?

Your clarification would help us better understand your request and provide an accurate answer.

borisbnh

This version: Suntech ST8310, has a new model that is more compact, they have the same protocols and features, but a new equipment model was made, so I was in doubt if you would create a specific port for it to control the quantity of specific equipment.