Parking question and tracking mode

Valdimar

However, I must turn to you for help again. How long must the car be parked after stopping for the information about “Parking” to appear. When I stop at an intersection with traffic lights, it stops tracking. Can this time be increased? My next question is what is the most accurate tracking mode - with or without GPRS, that is to set “gprsmode 1″ or “gprsmode 0″. Thank you and best regards.

rost

Hello, Valdimar ,

To fix the parking, it is necessary that the vehicle was 120 seconds without movement.
If the device, in principle, will not send messages for 300 seconds, then the trip will end forcibly and will be terminated accordingly.

With gprsmode 1, your device will send commands via UDP, with gprsmode 0, the device will send data via TCP. In this case, we are talking about the method of data transfer. As far as we know, for your device (Xexun TK 102) the ability to receive data via UDP is not integrated. Therefore, in principle, you can only use gprsmode 0.

We found this info here. by the link. – https://www.manualslib.com/manual/1184219/Xexun-Tk103-2.html?page=27

Valdimar

Hello, I sent SMS “123456version” and I got the answer “Tracker-106 V2.7″, when logging the device I used the data for TK102, on the command “123456gprsmode 1″ I got SMS “gprsmode 1 ok!” and on the Ruhavik website and in the Android application I have my locator and even the time changes and the minutes are updated because on the website and in the application the time is accelerated by 60 minutes while after sending the Staus the time is correct. Does “123456 gprsmode 1” allow more accurate tracking? I am not asking about costs but accuracy

rost

Hello, Valdimar ,

This question should be directed to your device manufacturer or retailer. This question is about the configuration of the device itself, which we cannot know.

So please contact the manufacturer.

If you manage to get an answer, post it here, it will help other users in the future.