Hello,

marius

Please add Spetrotec i-Watcher OBD in the tracker list.
(Server: 193.193.165.166 Port: 21093 is OK ?)

rost

Hello, marius ,

It is important to understand that each unit created in the system(GPS-Trace apps(Ruhavik)) can be assigned its own server address and port.
So, you should firstly create a unit with Spetrotec Spetrotec i-Watcher AVL/CAN or Cellular Alarm device type.
Then, you need to direct the device to the server address and port specified in the Common unit settings.
For more information on unit settings, follow the link. – https://help.gurtam.space/en/article/configuring-and-deleting-a-unit

If you have any other questions, do not hesitate to contact us.

marius

I have iWatcher OBD !!

marius

In the list of trackers are only:
i-Watcher AVL, i-Watche CAN and i-Watcher Cellular Alarm

rost

marius ,

Yes, we only have integrated devices from the list.
However, manufacturers often use the same protocols for devices.
Therefore, we recommend that you use 1 of the suggested types. The device will most likely work.

If you have any problems with connecting the device, write to us at support@gps-trace.com indicating your login, unit ID and a link to this forum topic, then we can check your situation in addition.

marius

https://gurtam.com/en/hw-manufacturers/spetrotec

https://gurtam.com/en/gps-hardware/obd/spetrotec-i-watcher-obd

rost

Hello, marius ,

The links you sent us refer to the Wialon app.
This particular model of the tracker is not integrated into the Ruhavik, so we ask you to try using a different type of device in the application.

If you have any problems with connecting the device, write to us at support@gps-trace.com indicating your login, unit ID and a link to this forum topic, then we can check your situation in addition.

rost

Hello, marius ,

We have checked, and you can indeed create this type of device in the Ruhavik application under the device types Spetrotec Spetrotec i-Watcher CAN.

After creating a unit, you can direct this device to the server 193.193.165.166 and port 20844.
These server address and port will be specified in the Common settings of the unit.

marius

I tried and it doesn’t work with the settings for Spetrotec i-Watcher CAN.
You need to create i-Watcher OBD !

rost

Hello, marius ,

If you have any problems with connecting the device, write to us at support@gps-trace.com indicating your login, unit ID and a link to this forum topic, then we can check your situation in addition.