Hi there, trying to setup my Teltonika RUTX11 router to function on Ruhavik. Been contacting Teltonika without success. Kind regards Tony

    Hello, TShep ,

    Regarding setting up such a device to Ruhavik, its better to contact us via email support@gps-trace.com

    By the way, can you describe what is the problem in more detail?
    Probably we can help without further investigation.

    TShep Hello!
    Most likely, when configuring the tracker, you need to specify the server and port on the AVL and NMEA tabs.
    Please check what settings you specify and if the problem persists, please write to us at support@gps-trace.com and attach screenshots of your tracker settings please.

    3 years later

    Configuration and Setup for RUTX Devices

    We would like to share some useful information provided by one of our users. He encountered difficulties while setting up his RUTX11 device but managed to resolve the issue, and now it works correctly.
    ere are the key configuration details:

    Service -> GPS -> NMEA

    Forwarding: off
    NMEA Forwarding Cache: Flash Memory
    File: /mnt/gpscache
    NMEA Collecting: ON
    File: /mnt/gps
    NMEA Sentence Settings: Forwarding and collecting on all positions “on” except PQGSV and PQGSA
    All interval settings: 900 seconds (can be increased if needed)
    Service -> GPS -> AVL

    The user also noted that this configuration works for all RUTX models, including RUTX09, RUTX10, RUTX11, RUTX12, RUTX14, and RUTX50.




    We appreciate the user for sharing this valuable information and for allowing us to post it. We hope these instructions will help you set up your devices.