Autoscan GPS (Microline)

chol Today can’t bring up to online that tracker (Device ID: 9139139126 , model Autoscan A-100 , took for temporary use).
But, another tracker model Автоскан-Трек Device ID: 359772036581529 , is still online. As I see it rarely sends GPS-data coordinates, although the connection to the server is established and regularly reconnected.
Packet with GPS-data:

Incorrect SDATE:

chol Yes, several packets with accumulated data were sent (1024 byte in this example). By the way, how to insert a picture normally?
https://ibb.co/wr3WZvc

In normal mode, the tracker sends packets more often and one position per packet: 36 bytes:
https://ibb.co/d0RsXtc

In TOOLBOX-column “server.timestamp” date and time recived data started every day at 06:05. After a minute or two, the reception of data stops. The next day, the server again receives packets from the tracker at 06:05 and again stops. This is normal? The analysis of ip packets from the tracker to the server shows the regular sending and receiving of geoposition data (every 5…12 seconds when driving and 10…15 minutes in the parking lot). At the TCP-protocol level, communication works fine. Does the server not accept data until the parser is restarted daily at 06:00?

Track
AutoScan5
15/11/2019 00:00 - 15/11/2019 14:11
No messages for the specified period.
Change intrerval

359772036581529

Good work! Get small trip, track showed correctly! Thank you for support. On Monday I will continue testing. Hope my help was helpful. I wish you success with your project!