battery level

nroum

hi,
is it possible to indicate battery level?
thanks

kuko

What tracker do you use?

nroum

kuko teltonika fmb920

kuko

You should just enable param with battery in teltonika configurator.

nroum

Ok thank you I will try it and get back for update the answer.

niwend

Hello! I use a legacy tracker (Gosafe G91I, although I have Ascend AS6), the configurator does not work for it (SetBox is not available for a device from the Legacy category). On the other server, the display of the remaining charge worked. It would be great if I saw this online. Ready to help alpha and beta tests. Thanks. Screenshot of another server with battery percent

car012

I have teltonika fm1110 and I cannot see battery level but on second gps queclink Gl300 it’s possible. Can someone tell me why I don’t see battery on fm1110?

kuko

car012
Open Toolbox and try to find params with battery value.
If there are no params, then use Teltonoka configurator to enable this param.

as683

I have the same problem as car012.
I use Teltonika FM1100.
In the old version of GPS-Trace, the external voltage, the number of satellites, and the GPS-signal level were displayed.
In the settings of the tracker itself, nothing has changed.
In the new version of GPS-Trace these parameters are not displayed, and the toolbox does not load at all.
Dear administrator, tell me what needs to be done to see these parameters in the status of the device.
Thank.

car012

As683 After changing ip und port with tool box I can see battery level, but if you cannot see you need to change new firmware on your modem fm1100 und will be able to see battery status. Only what I don’t like that is you can only see battery status with tool box.

as683

car012:
What version of firmware FM1100 should be in order to see the level of external voltage? (What is your firmware version?)

car012

as386 did you change ip and port? If you say that before it was possible to see battery than you need see again, only change ip and port. New firmware you can download on teltonika suite, also you need updater too do this. Witch exactly I have fm I need to see, need too start my laptop.

as683

car012:
Yes, I changed the ip and port in the tracker settings.
But… Question number 1: where can I see the external voltage level (in which area of the screen or tab)? In the old version GPS-trace, this was visible when you hover over an object.
Question number 2: why my toolbox doesn’t open (Chrome browser)?

car012

as683 go to tools, then advanced messages info, klik on toolbox, then link to thoolbox ( blue) and you can see everything. Just go left and right, you have really a lot information. Second question about Google Chrome I don’t know.. I was trying und works with out problem. Also I was try to upload Fotos that you can see where is battery level but I cannot from my phone.

as683

“as683 go to tools, then advanced messages info, klik on toolbox, then link to thoolbox ( blue) and you can see everything.”
That’s exactly what I do. But, a new tab opens and it is completely empty. Absolutely blank white tab. Maybe I need to change something in the browser settings?

as683

Did it in Opera browser. The link (Toolbox) has opened in this browser. So the problem is in Chrome.
car012, thanks for the help.

car012

683 do you have maybe ad blocks or something like that? Try from another pc od handy..