How to configure angle report Sinotrack ST-901A+?

jaimegarzon1

Hi all. The sinotrack ST-901A + has an angle report, that is to say that in each turn of the vehicle it issues a position report … what is the command or how should it be configured to bypass this function?

Please tell me how to configure the ST-901A + angle report?

In the JT808 protocol manual there is the command 0×0030, but there is no SMS command.

How is it configured?

dapi

jaimegarzon1 Hello.
Could you please clarify whether the tracker is sending you location every time the direction of your movement changes and you find it a problem or do you receive notifications from the tracker about it? If you receive notifications from the tracker probably such notifications are enabled via SMS.
You should see the instruction for your tracker for SMS commands to manage the trackers settings but not the protocol that is describing how the data is sent (if this is the protocol for sending the data for your tracker).

jaimegarzon1

dapi
Hello, it happens that the ST-901A + manual does not say what is the command to adjust the report by angles (it reports every 20 degrees change in curves). so I need to know if you know what that command is in order to configure it … or if you know someone who has worked with this sinotrack ST-901A + model to resolve the doubt

dapi

jaimegarzon1 Hello. Unfortunately, since we do not sell or configure trackers and taking into consideration the diversity of the devices we are not able to recommend you any commands. Perhaps other users of the forum will be able to help if they have the relevant experience.

EmersonDronesVdeosAreos

bom dia alguém poderia me ajudar? cadastrei meu rastreador ST-901A como dispositivo sinotrack ST-901 e 193.193.165.37 porta 30205, mas não quer conectar.

ashe

EmersonDronesVdeosAreos Hello!
Please write to us at support@gps-trace.com indicating your username, IMEI and tracker model, so we can check the data.
We have just added this device and there may be some bugs.

EmersonDronesVdeosAreos

Bom dia, pra quem está tentando cadastrar se GT02 na plataforma, devem cadastrar como dispositivo XEXUN e o endereço é 193.193.165.37 porta 26731 na categoria HARDWARE, ele conecta rapidinho OK.
agora por favor se alguém conseguiu conectar o rastreador ST-900 na plataforma também, me ajudem a conectar o meu, porque neste não estou conseguindo, agradeço muito se alguém puder me ajudar também…obrigado

ashe

EmersonDronesVdeosAreos Hello!
What is the exact name of your tracker model?
Please try to connect it through the category Hardware and model Sinotrack.
If it doesn’t work, please try to configure your tracker to debug server 193.193.165.37 and port 20974.
We’ll see if the data comes from your tracker and what data comes.
Please write to us at support@gps-trace.com when you do this.

EmersonDronesVdeosAreos

o modelo do meu rastreador é o SINOTRACK ST-901 A+, essa porta 20974 que você me enviou e de qual dispositivo na plataforma pra mim colocar nela?

ashe

EmersonDronesVdeosAreos Hello!
You don’t need to select any device in the application, only set the tracker on server and port. This is a test server and port. You will not see the data in the application. This will allow us to check if the data is coming in, and if it is, what kind and where the connection problem may be.