Help for topin ZX303 gps tracker

AlexandreOliveira

i have one of this gps tracker topin ZX303 that works with the 365gps.com but i wish to start with gps-trace software.
My question is does the ZX303 compatible with the gps-tracer? i don´t mind to make a test since he accept to change the IP server, but i can´t find any where the 365gps ip server so if th ZX303, doesnt work with the gprs-tracer i dont get a paperweight or if i can make a reset full reset.

aswtos

AlexandreOliveira After a lot of searches I found a solution for my pet tracker Topin 12Gp that might help with your tracker also.
So, to set the platform server you need to send an SMS with command DOMAIN#ipnumberhere#portnumber#
For example DOMAIN#193.158.2.34#2240#

AlexandreOliveira

After a few test the gps topin ZX303 work with the program.
the setup i found are this two.

device legacy pomcell server ip 193.193.165.166 port 20695
device legacy GT06 server ip 193.193.165.166 port 20281

i have change the ip in the gps by this 2 commands
domain#ip#port# and server#ip#port#

but can someone explain how the “events” work?

with pomcell i get information in the track and the trip but none in the events
with gt06 i get only information in the track

this possible to save to KMZ or KML format?

in the fence i have one suggest in the spare mode the 4 corners should move in depend way. EX: diagonal road in relation to the square the square will to big.

yuliya

AlexandreOliveira Добрый день. Как вы подключили topin ZX303? Какой домен в итоге вводили?

LLZANCHI

AlexandreOliveira
Olá, Alexandre, vc conseguiu acessar o ZX303 pelo gps-trace pelo que escreveu, poderia me dar mais alguns detalhes? Quais comando via SMS vc enviou?
Obrigado

ashe

Hello!
Events appear when an SOS signal and input / output from the geofence are sent.
There is currently no export of data in the application.

AlexandreOliveira

After a big search on internet i found that topin ZX303 connect to 365gps with this ip
120.76.28.239 port 8002 or 120.76.28.239 port 8005

gps-trace can´t work with google maps? i ask this because the google maps in some areas was a update maps and the bings doesn´t.

ashe

Hello!
The application does not currently work with Google Maps

Wibly

Hello, I have a Topin G12P tracker which is working with the legacy GT06 server but has a long interval between updates when live tracking. The tracker is moving very slowly and it seems the updates are based on distance travelled ?

Is there any way to change this ? Due to it connecting as a legacy device I cannot use the Setbox. I have tried connecting using GT06 settings for Xexun, Coban, Concox but without success.

I’ve been using it for a couple of days and the connection and tracking have been very reliable.

ashe

Wibly Hello!
Please check the tracker settings. Perhaps it sends data at a longer interval than you want to see updates

AlexandreOliveira

Do you can set the upload intervalo for 10 seconds. Md#10
On zx303 this can be done. Try do this.

Wibly

Yes I have done that, I think it is the way that the server makes the position updates on the map, it takes 2-3 minutes between avatar moves and seems related to distance travelled. I will try it in a car tomorrow and see what happens.

AlexandreOliveira

On that way i dont know, because i Will check the track on the end of the trip.

rennan

Hello. What is the Device Tipe to set the Topin ZX612?

ashe

rennan Unfortunately, the data transfer protocols of trackers from different manufacturers can vary greatly. Therefore, we cannot say for sure whether this tracker will work with our application.
At first you can try GT06 (category - Legacy), then all devices from here https://forum.gps-trace.com/d/340-how-to-connect-trackers-of-types-gt06-gt06n-gt02-gt02a-tk110-and-etc ,also you can try devices - YuLongDa GT06, Secumore G200, Xeelectech LK206, Xeelectech LK210, Rilla G19
Please write here if one of the devices is suitable so that other users can also know about it.

rennan

Should I use the Xexum or Coban MEI protocol?

ashe

rennan Hello!
Since we definitely can’t say whether your construction works as an analogue of one of the above, then you should try each of them. Perhaps one of them is suitable for your tracker. You can start with GT06 (category - Legacy) and then try everyone else, including the ones you named.

AnweshAdhikari

Hello,
After a little time, even I need some help with this tracker (ZX303)!
Can somebody please help me with this?
Please!

dapi

AnweshAdhikari
Hello. Could you describe your request in more details.

Plaha7

Zx303 how to fix Tracker won’t turn on problem, Reset did, can I need to flash the firmware or not?

dapi

Plaha7 Hello.
We would like to specify if you are asking the users of our forum to share their experience with similar problem? As far as we understand your device can’t be turned on?

Plaha7

dapi нет не вкл. При нажатии часть микросхем греется