Help XEXUN TK102

Rafa

I dont see my car on the map in toolbox:
[23/01/2020 07:46:19] 301: device disconnected (data parsing error (see log details))
{
close_code : 6
duration : 595
error_text : “[xexun:207:14, input 0048d0 19 000003] pvm_exec_input_cmp_error: expected GPRMC; got: INTER”
event_code : 301
event_origin : “gw/devices/493405”
event_text : “5.184.4.52/disconnected”
id : 493405
ident : “359586014729748”
msgs : 7
origin_id : 493405
origin_type : 11
recv : 1016
send : 0
source : “5.184.4.52″
timestamp : 1579761979.506697
transport : “tcp”
}

I have configuration to: 193.193.165.37:32329
Sometimes i see message with wrong timestamp 1999 year or something

ashe

Hello!
Try to get data by making a request to the tracker to see that it works correctly and sends the correct data

Rafa

{“channel.id”:11743,“device.id”:493405,“device.name”:“Honda Pilot”,“device.type.id”:408,“ident”:“359586014729748”,“peer”:“37.47.43.227:29834”,“position.direction”:291.9,“position.latitude”:52.246983,“position.longitude”:21.078105,“position.speed”:0.76,“position.valid”:true,“protocol.id”:123,“server.timestamp”:1579771300.493721,“timestamp”:943923600}

ashe

Hello!
You may notice that the timestamp and server.timestamp data do not match. The timestamp of the data is the time data in the format (Unix TimeStamp), and this is 11/30/1999 at 1:00 a.m. (UTC).
Thus, your tracker sends incorrect data. Perhaps this is due to GPS rollover. You can see the information here https://en.wikipedia.org/wiki/GPS_Week_Number_Rollover
Perhaps you should update the firmware of your tracker, you can also check the information with the seller or manufacturer.

Rafa

After 30 minutes outdoor gps started working and tracker found right timestamp. This is a very slow device and requires patience.
Thx for help.

nikolaidouhelen

Vjoycar tk05 was working great but seems to not sending location since 8 hours before. Is there a server problem or should I change any setting?

nikolaidouhelen

It is working,sorry for my mistake