Dear RasulGADZHIEV,
To configure the tracker s2433, you can use the NTC Configurator https://www.navtelecom.ru/en/equipment/smart-series/smart-s-2433
NTC Configurator is a program designed to configure device settings, update firmware, check the operability of GSM monitoring systems of SMART, SIGNAL and ELEMENT series.
After creating the unit in the app, you should connect it to your tracker. Thus, the tracker will be able to send data to the application.
To do this, configure the tracker by performing the following actions:
- Configure the server and port for data transmission
When the unit is created, the application shows the server address (IP or DNS) and the port to which you should direct your tracker so that the system begins to receive data, process it and display in the application.
- Set the UTC 0 time zone
For most trackers, regardless of your location, set exactly the UTC 0 time zone. In the application, your local time zone is determined from the data of the device (phone or computer) on which you use it.
- Configure the APN
Configure the APN according to the provider of the SIM card you are using with the tracker. Depending on the provider, this can be just the APN or also the APN username and password.
As soon as you adjust the necessary settings and your tracker starts sending data to the configured server address and port, you can immediately see it on the map in the application.
If you still have problems connecting the device, please write us to support@gps-trace.com specifying login, unit ID and device type, then we can check your issue and try to help.
Also write a link to this topic in your email request, so that we can understand that this is you.