Hello friends, how are you? I need support mainly with Coban equipment/settings. can you help me?
I have a small problem with my COBAN equipment. I have been using the platform for many years, and it has always worked perfectly. I have two Coban devices. An older one that works perfectly with positions every 30 seconds. And another one a little newer, with new functions that is online on the platform, but only updates position when I call him requesting position in the old fashioned way SMS. Below are my SMS settings sent to the device:
reset123456
begin123456
admin123456 xxxxxxxxxx
adminip123456 193.193.165.37 29318
apn123456 zap.vivo.com.br
up123456 vivo vivo
gprs123456
fix030s***n123456
time zone123456 0
With these parameters, my old unit is already able to communicate smoothly. But the newer drive doesn’t work with these settings. I tested other solutions described in the forum, such as the additional commands:
less gprs123456 off
nosuppress123456
protocol123456 18 in
protocol123456 Oct 18
protocol123456 12 in
protocol123456 12 out
sleep123456 off
schedule123456 1m
fix030s001m***n123456
GPRS123456.0.0
Additional Information:
STATUS (check123456):
Power: ON
Battery: 100%
GPRS: ON
GPS: ON
ACC: OFF
Door: OFF
GSM: 22
Oil: 0.06%
Toolbox in Device Traffic, receives and sends simple data often information like IMEI and ON. The position and other parameters it only sends when I call the equipment and it sends position via SMS.
Telephone card information:
Vivo Brazil
Perfectly working GPRS data, sms
I’ve already tested other identical equipment and the same problem happens, I also tetei another GPS antenna (always in an open place) and so I ruled out the possibility of a defect. I’ve driven the car for a few kilometers and it updates position after some time, but it seems to have its own source, only when you want it, not according to the configuration.
I look forward to a possible solution. Thank you in advance for taking the time to solve my problem.