Can anyone advise how to backup current settings of my tk905 tracker and then upload dns and ip settings to use a different tracking site as the tkstar one is awful !
Hello, hullstorage ,
Firstly you should register and login in the application. – https://gps-trace.com/en/article/registration-and-login
Then it will be enough to create a unit in the system. – https://gps-trace.com/en/article/how-to-create-a-unit
And direct your device to the server and port specified in the Common unit settings. – https://help.gurtam.space/en/article/configuring-and-deleting-a-unit
SMS commands for your device you can find by the link, check it. – https://www.manualslib.com/manual/1035746/Tkstar-Lk109.html?page=5#manual
As soon as your device starts sending data in messages to the server, you will immediately see it in the application.
If you have any questions during the process of setting up a unit and device, do not hesitate to write us to email@example.com
rost so the host at moment is this 57981.flespi.gw, do i need to change or send any command to the device ?
Server address(IP/DNS) and port should be set on device’s side.
So you should send SMS command to your device in format: Adminip123456+space+ip+space+port