Dear@Chrispasq#20879
If you need to see your vehicle in the application, then you should have a tracker installed on it.
So after creating account you need to do the following:
- To create a unit in the system. – https://gps-trace.com/en/help/ruhavik/create-unit
- And direct your device to the server and port specified on the Hardware tab in the Unit settings.
- Set the UTC 0 time zone.
For most trackers, regardless of your location, set exactly the UTC 0 time zone. In the application, your local time zone is determined from the data of the device (phone or computer) on which you use it.
- Configure the APN.
Configure the APN according to the provider of the SIM card you are using with the tracker. Depending on the provider, this can be just the APN or also the APN username and password.
As soon as your device starts sending data in messages to the server, you will immediately see it in the application.
The tracker is usually configured using SMS commands specified in the tracker guide. The commands are sent to the number of the SIM card used with the tracker.
If you have any questions during the process of setting up a unit and device, do not hesitate to write to us at support@gps-trace.com and send your login, unit ID, model and manufacture of the tracker and a screenshot of the device configuration (SMS commands and device’s answers), we’ll try to check it additionally and help you.
