Hello
I have GT02A tracker. So far everything has worked ok, but since several days tracking device is behaving strangely…
Since 24.01. (about 2 weeks) I have noticed that the tracking device does not enter parking mode when the car is stopped in one place for longer.
In parking mode when car was standing in one place tracking device stopped sending coordinates after few minutes. Now, despite the car being in one place, tracking device is constantly downloading new coordinates that differ by a few meters so that on a day off e.g. sunday, the car being parked in a parking lot, virtually moves around the parking spot by as much as 3km in 24 hours by constantly changing the coordinates.
This constantly overwrites the memory with unnecessary data, reducing the number of days in the route history that can be viewed.
In attached the activity on the map on 23.01. (when was ok) and 24.01. (when the problem started to appear and is still going on).
Also the status indicator changes constantly from green dot - online, to yellow dot - was online recently.
In toolbox I found these logs. Since then the problem started:
300: device connected
24/01/2022 13:59:09
{
event_code : 300
id : 460451
ident : “057045275411”
origin_id : 460451
origin_type : 11
source : “31.0.75.152:17281″
timestamp : 1643029149.086509
transport : “tcp”
}
301: device disconnected (protocol implementation updated) (yellow log)
24/01/2022 14:49:30
{
close_code : 8
duration : 3023
event_code : 301
id : 460451
ident : “057045275411″
msgs : 29
origin_id : 460451
origin_type : 11
recv : 1754
send : 375
source : “31.0.75.152:17281”
timestamp : 1643032170.150839
transport : “tcp”
}
300: device connected
24/01/2022 14:49:33
{
event_code : 300
id : 460451
ident : “057045275411″
origin_id : 460451
origin_type : 11
source : “31.0.75.152:17282″
timestamp : 1643032173.18984
transport : “tcp”
}
301: device disconnected (received data violates channel’s protocol) (red log)
24/01/2022 14:49:39
{
close_code : 4
duration : 7
error_text : “0006a8 [xexun:98:18] in @xexun_packet_in_parentheses: {ext} not a hex number: ‘0513S00G64′\n by [xexun:68:4] in @packet”
event_code : 301
id : 460451
ident : “057045275411”
msgs : 2
origin_id : 460451
origin_type : 11
recv : 218
send : 18
source : “31.0.75.152:17282”
timestamp : 1643032179.76738
transport : “tcp”
}
Does anyone know how to solve this problem?