Hunter-electronics app-100 (model 868)

Namikh

Hello, i would like to test this dog tracker on Ruhavik but not sure what manufacturer/device i could select when adding unit. Is there a generic unit i can try? Any suggestions?

The tracker circuit board only has “hunter electronics GPS808 v6” printed on it which doesnt seem too helpful.

Any help or suggestions would be appreciated.

rost

Hello, Namikh ,

Please point your device to our debug server 55237.flespi.gw or 193.193.165.37 and port 21343.
Then write to us at support@gps-trace.com with the device ID.
Also in the letter, provide a link to this forum topic so that we understand what is at stake.

If you send your device, we will try to determine how your device can be used on our platform.

Namikh

Hi rost

Thanks for your reply. I have pointed the tracker to 193.193.165.37 and sent email as you suggested.

rost

Hello, Namikh ,

Thanks, we will check and answer you soon!

Namikh

Thank you gps-trace team for determining which settings to use.
I have successfully connected after selecting:
device category - Legacy
device model - TwinMask MT90
and using the server and port setting from the application.

VincenzoStipo

Ciao, vorrei sapere l’intero funzionamento e il procedimento di attivazione dei radiocollari hunter model 868 in quanto non ho ricevuto le istruzioni

kuta

Dear VincenzoStipo
In order to obtain detailed information about the tracker and its settings, you need to contact its seller or manufacturer directly, they are the ones who have the greatest expertise in this matter.

In order to use your tracker in our system you need to create an account, unit and configure the tracker. How this is done is described in our guide https://gps-trace.com/en/how-to-start .

Commands for setting up a tracker are usually contained in the instructions for the tracker. Perhaps the link to the instructions will help you https://www.manualslib.com/manual/2054611/Hunter-App-100.html#manual

If you have additional questions please write to us at support@gps-trace.com with the login, unit ID, screenshot of device configuration (SMS commands and device’s answers) and link to this topic, then we will try to check additionally and help you.