BI 310 Cicada V2, setbox

onicsy

I can not configure the beacon via setbox, it says select the device.
860906047031205

rost

Hello, onicsy ,

We are working on adding commands for BI 310 CICADA devices. Tell me, what commands do you need for this device?
If possible, attach the command descriptions from the documentation to the device.

onicsy

It turns out the functionality of the beacon, at the moment is it a connection once a day? And what about the alarm mode, etc.? How to be?

onicsy

you need the lighthouse to get in touch once a day at 5:00 am. It also requires anxiety and pursuit mode.

rost

Hello, onicsy ,

It looks like you mean a command for setting the tracker working mode, please clarify if this is so?
If not, send a full description of the command, and if possible, send information from the documentation for the device so that we understand how this command should work.

We are planning to add commands for this tracker.
While we are implementing commands, try using SMS commands for the necessary settings, if such commands are in the instructions for the tracker.

onicsy

1625734138436488.pdf

952kB

onicsy

you can please set up the beacon to get in touch at 5:00 am Kiev time. I’ll send you the instructions.

rost

Hello, onicsy ,

Our specialists will work on adding commands to the setbox.

We cannot configure specifically its devices, at the moment try to configure the device by connecting it to a PC. For help in setting up the device, it is best to contact the dealer or the manufacturer of the device, only they will be able to provide competent assistance.

Also specify which commands you want to integrate from the protocol, because there is a setting for timeouts and an operating mode, but we did not find the setting of a specific time for the device to communicate.

onicsy

Hello, it is already possible to configure the time for the beacon to communicate and activate the alarm mode?

rost

Hello, onicsy ,

This feature requires significant improvements on our part.
We are working on this revision and will notify you when it is done.
Please wait.

onicsy

hello, how are things? Half a year has passed since the appeal.

rost

Hello, onicsy ,

We recently added several commands to the Setbox for this type of device. For example, Pursuit mode was added.

At the moment, this revision is in the queue, since a large number of improvements are required to implement this function.