Good evening, I run the tracker with the Legacy ST 901 setting, tracking, geo fence, works. Unfortunately no alarm is triggered with 2 functions: “Ignition on (orange cable) Activate (SMS) 886 + password” and “Switch off the external power supply 011 + password” Can you help me ? I would like to stay with Ruhavik a great program, thank you very much

Hello, KlausRoessler , Please clarify whether you want to send such commands from the application or to receive a notification when a parameter is changed? If you mean a notification about a parameter change, please specify the names of the parameters coming from the device, we will check it additionally. You can find these parameters in the Toolbox of your unit by looking at the messages. More info about Toolbox you can find by the link. – https://help.gurtam.space/en/7af597c9-e302-4e55-a66d-9e9f97c67d93

"SetBox is not available for devices in the “Legacy” category"……

Hello, KlausRoessler , Setbox is not available for devices in Legacy mode. However, try to use “Gosafe G1S” device type in unit settings. Then direct your device to new IP and port. This device type is from Hardware category and most likely has the same protocol as your device. Then check the unit’s Setbox. We do not guarantee that the commands will work, as the protocols may differ slightly, which may cause the commands to not work. We are planning to gradually add devices from the Legacy category to Hardware, but it will take time and for now you can try the method described above.

Good day, unfortunately it doesn’t work with the settings of the Geosafe G1S. Do you have another solution? My commands + password at the end: time zone 896, coordinates 669, vibration 181 on 180 off alarm SMS when 12V ignition on 886

KlausRoessler Hello, Please direct your device to our debug server: IP: 193.193.165.37 and port 29355. Then write to us, we will check it additionally.

Good evening, thank you very much for your support. The Tracker is now online on your debug server. You can find the tracker with the ID 9171920685 or the IMEI 353130094365457

KlausRoessler , We have verified the data from your tracker. The tracker connects but does not send anything, even the packet login does not come from the device, the device is immediately disconnected. In the package, even if the device does not have time to arrive, the device immediately terminates the connection. Please check your device configuration as we did not receive any complete data packet to check.

Hello, after several attempts I got the tracker running again, it should now be available on the debug server under ID9171920685 or the IMEI

Good day, For your information: I have just deactivated the test on the debug server and am connected to the portal normally again. If you want to analyze data again, please let me know. Best regards Klaus

Good day, unfortunately Gosafe G1S does not work. But “MY Rilla G19” works immediately. For information: You have to register the tracker with the ID, IMEI does not work. Would it be possible to integrate this type into hardware? Thank you Klaus

Loading...

Something went wrong while trying to load the full version of this site. Try hard-refreshing this page to fix the error.

Sinotrack ST 901 Port 21855 Individual commands are missing

« Previous Page