Jump to content


TLT-2H not working after 2017


  • Please log in to reply
163 replies to this topic

#61 Guest_Shahzad Sohail_*

Guest_Shahzad Sohail_*
  • Guests

Posted 19 January 2017 - 15:00 PM

We r using TLT 2HU since long time but i am faceing problem since 1-1-2017 my whole devices not responding on any comand kindly guide me how to resolve this issue
BR
Shahzad
Ptmw@live.com

Remote upgrade complete. Version number still V4.02.240GF4 2013/04/17RELEASE.

 

 

 

how to connect computer via serial port com1 tlt 2hu



#62 Guest_ALLANCP15_*

Guest_ALLANCP15_*
  • Guests

Posted 20 January 2017 - 11:48 AM

consegui fazer as atualizações  tutorial em


  • pach likes this

#63 Guest_RM2017_*

Guest_RM2017_*
  • Guests

Posted 21 January 2017 - 01:25 AM

Thanks for the download link

 

Hi All

 

I just encountered failed during firmware update because of drained battery

When i try again with full charge battery, the TLT 2H can not respons *SWVER# command and i can not start the update again

I confirmed that my cable is ok, i tested it using other device and working

 

is there any solution for this problem? 

 

Please advice

 

Thanks you

 

Good morning.
 
Friend, if you can not see which version of the device through * SWVER #, this is no problem, do the following:
 
In the Multiport download tool program, download the baudrate rate to 460800, go to options, then click the third option, then check the first option.
 
Once this is done, take the test version by version, from the youngest to the oldest. If you complete without error, reset the device and send an SMS with the code 6660000, verify that the date received via SMS is updated and the image has not changed. If both items are ok, your device is up to date.
 
Att. RM Trackers.
Www.RMRASTREADORES.com


#64 Guest_RM2017_*

Guest_RM2017_*
  • Guests

Posted 21 January 2017 - 01:32 AM

We r using TLT 2HU since long time but i am faceing problem since 1-1-2017 my whole devices not responding on any comand kindly guide me how to resolve this issue
BR
Shahzad
Ptmw@live.com

Remote upgrade complete. Version number still V4.02.240GF4 2013/04/17RELEASE.

 

 

Good morning.
 
Here in the forum we make available all the necessary programs and we also teach how to make the cable, just download and carry out the process according to the manual.
 
Att. RM Trackers.
Www.RMRASTREADORES.com


#65 Guest_RM2017_*

Guest_RM2017_*
  • Guests

Posted 21 January 2017 - 01:32 AM

We r using TLT 2HU since long time but i am faceing problem since 1-1-2017 my whole devices not responding on any comand kindly guide me how to resolve this issue
BR
Shahzad
Ptmw@live.com

Remote upgrade complete. Version number still V4.02.240GF4 2013/04/17RELEASE.

 

Good morning.
 
Here in the forum we make available all the necessary programs and we also teach how to make the cable, just download and carry out the process according to the manual.
 
Att. RM Trackers.
Www.RMRASTREADORES.com


#66 Guest_RM2017_*

Guest_RM2017_*
  • Guests

Posted 21 January 2017 - 01:48 AM

consegui fazer as atualizações  tutorial em

 

Boa noite amigo.

 

Muito bom o video, parabéns, só uma ressalva, nos arquivos que foram disponibilizados para download há um arquivo em word chamado: INSTALAÇÃO DRIVES CABO PL2303.

No iten 2 mostra uma fo da ligação dos cabos ao computador, mostrando o rastreador sem bateria interna, por tanto processo não utiliza bateria interna, e em momento algum pedimos pra utilizar a bateria interna. 

O início do processo só é dado após clicar em Start e em seguida alimentar o rastreador via cabo, se clicar em Start com ele já alimentado via cabo ou bateria, o processo não se inicia. Isso justifica porque o cabo não é alimentado via USB pelo fio vermelho positivo, justamente porque ele precisa ficar sem energia durante o start. Entendeu?

 

Att. RM Rastreadores.



#67 wilsontoledoneto

wilsontoledoneto

    Orange Fan

  • Members
  • Pip
  • 1 posts
  • LocationGoiânia / Brasil

Posted 22 January 2017 - 01:51 AM

Prezado RM tracker, poderia fazer um vídeo explicativo e postar no You Tube?



#68 Guest_RM2017_*

Guest_RM2017_*
  • Guests

Posted 22 January 2017 - 01:57 AM

Prezado RM tracker, poderia fazer um vídeo explicativo e postar no You Tube?

Good evening.
 
Our friend Allan posted a video, follows: https://youtu.be/mQIuGR0x5p4
 
Att. RM Trackers.
Www.RMRASTREADORES.com


#69 Guest_RM2017_*

Guest_RM2017_*
  • Guests

Posted 22 January 2017 - 01:58 AM

Prezado RM tracker, poderia fazer um vídeo explicativo e postar no You Tube?

Boa noite.
 
O nosso amigo Allan postou um video, segue: https://youtu.be/mQIuGR0x5p4
 
Att. RM Rastreadores.
www.RMRASTREADORES.com


#70 Guest_rhsilva_*

Guest_rhsilva_*
  • Guests

Posted 22 January 2017 - 13:22 PM

Bom dia, 

 

Pessoal no meu rastreador TLT-2H a entrada não é mini USB, é uma entrada de 5 pinos muito parecido com a entrada do cabo da bateria. Neste caso como posso fazer o cabo para atualizar o rastreador ?? A versão é a V3.02.184F4, qual seria a recomendada para atualizar ?  

 

Tentei anexar uma foto aqui, mas não consegui

 

Obrigado 

 

Guys in my Tracker TLT-2H is not the mini USB port entry, It´s 5 pins entry likely the baterry cable. In this case how can I do the cable for uptade the device ? Which one version should I update for V3.02.185F4 ?

 

I Tried attach a photo, but I could not do. 

 

Thank you much 

 

Rafael

rhsilvaa@gmail.com



#71 Guest_WilliamKBR_*

Guest_WilliamKBR_*
  • Guests

Posted 23 January 2017 - 12:16 PM

Pessoal no meu rastreador TLT-2H a entrada não é mini USB, é uma entrada de 5 pinos muito parecido com a entrada do cabo da bateria.

 

Guys in my Tracker TLT-2H is not the mini USB port entry, It´s 5 pins entry likely the baterry cable. 

39s9w704MuCj.jpg



#72 Guest_fipbento_*

Guest_fipbento_*
  • Guests

Posted 24 January 2017 - 22:13 PM

Bom dia, 

 

Pessoal no meu rastreador TLT-2H a entrada não é mini USB, é uma entrada de 5 pinos muito parecido com a entrada do cabo da bateria. Neste caso como posso fazer o cabo para atualizar o rastreador ?? A versão é a V3.02.184F4, qual seria a recomendada para atualizar ?  

 

Tentei anexar uma foto aqui, mas não consegui

 

Obrigado 

 

Guys in my Tracker TLT-2H is not the mini USB port entry, It´s 5 pins entry likely the baterry cable. In this case how can I do the cable for uptade the device ? Which one version should I update for V3.02.185F4 ?

 

I Tried attach a photo, but I could not do. 

 

Thank you much 

 

Rafael

rhsilvaa@gmail.com

 

Ola a todos,

 

Tenho um desses que deixou de funcionar no ano passado, já fui ao centro electrónico deixar e eles telefonaram-me hoje a dizer que arranjaram a ficha para essa entrada onde se podem ligar os fios.

 

@rhsilva assim que eu tiver a ficha eu digo qual a referência ou o nome.

 

-----------------------------------------------------

 

Hello to all,

 

I have one of those that stopped working somewhere last year, i went to the electronics store and left it there for them to check the connection. They called me today saying that they've found the connector type and they will get it for me.
 

@rhsilva as soon as i have it, i'll post here the reference or any data about it that i may have!

 

----------------------------------------------------------

I already ordered my pl2303 converter too but since it comes from China it will take a couple of weeks to arrive. 

I already downloaded the software + firmwares.

 

So next step is to update it as soon as the converter arrives.

 

----------------------------------------------------------

 

And to finish my post. THANK YOU SO MUCH "RM TRACKER" AND ALL OF YOU FOR THE EFFORT TO RESOLVE THIS!



#73 Guest_rhsilva_*

Guest_rhsilva_*
  • Guests

Posted 25 January 2017 - 11:29 AM

Ola a todos,

 

Tenho um desses que deixou de funcionar no ano passado, já fui ao centro electrónico deixar e eles telefonaram-me hoje a dizer que arranjaram a ficha para essa entrada onde se podem ligar os fios.

 

@rhsilva assim que eu tiver a ficha eu digo qual a referência ou o nome.

 

-----------------------------------------------------

 

Hello to all,

 

I have one of those that stopped working somewhere last year, i went to the electronics store and left it there for them to check the connection. They called me today saying that they've found the connector type and they will get it for me.
 

@rhsilva as soon as i have it, i'll post here the reference or any data about it that i may have!

 

----------------------------------------------------------

I already ordered my pl2303 converter too but since it comes from China it will take a couple of weeks to arrive. 

I already downloaded the software + firmwares.

 

So next step is to update it as soon as the converter arrives.

 

----------------------------------------------------------

 

And to finish my post. THANK YOU SO MUCH "RM TRACKER" AND ALL OF YOU FOR THE EFFORT TO RESOLVE THIS!

  

Bom dia @fipbento estarei no aguardo da solução.

 

Obrigado.

 

 

Good Morning @fipbento. I will be waiting the solution.

 

Thank You.



#74 Guest_gertjotigelaar_*

Guest_gertjotigelaar_*
  • Guests

Posted 25 January 2017 - 15:19 PM

Bom dia @fipbento estarei no aguardo da solução.

 

Obrigado.

 

 

Good Morning @fipbento. I will be waiting the solution.

 

Thank You.

Hi All,

 

I have found in another site that the connectors for the older (non mini USB) are: JST 1mm pitch connector, part number SHR-05V-S- . Counterpart housing is part number B BM05B-SRSS-TB, and crimp terminals SSH-003T-P0.2 (RS sells pre-crimped 150mm wires). I have ordered these today to test them soon for my v500 units that are not on a data plan. I will let you know if the connectors are correct.

 

For the newer version, with the mini USB connector, the flashing via the PC is working fine. I can confirm successful flashing of  v600/v700 with V4.02.251HF4-M and this is working and is now V4.02.252HF4-M. The units show in our application and are working fine.

 

Flashing Over the Air (OTA)

I have also succesfully done OTA firmware updates, but this has only been succesful for the older units V500 with the SW version V3.02.172. I placed the updated (downgraded) software files for the V500 V3.02.158VYJ005 in the root of FTP server. You need to take care that the server username is simple and short and so is the password. It can only contain letters and numbers and his limited length. If you use username: update password: update1234 it will work. The command you need to use is !-0000,[serveradress or IP],username,password. For example: !-0000,ftp.updateserver.com,update,update1234 The units are flashing correctly, but be aware of potential problems with empty battery! I lost 1 unit that is now not responding, I think it went dead during flashing. You do need working gprs connection and sufficient data in your plan. All files need to be in the root of ftp server. these are openatdll.dll, scatOPENAT.txt and V500.bin. You need to be patient because the transfer of the data may take time, since gprs is slow. If you have many units in the field, this might be your best bet. Make the engines run for power!



#75 Guest_eduardo2017GPS_*

Guest_eduardo2017GPS_*
  • Guests

Posted 25 January 2017 - 17:44 PM

Good afternoon,

Could anyone tell me if the TLT-2H device update solutions are compatible with the TLT-1C model?

tlt_1c_external_antenna_gps_tracker_for_

Thank you.



#76 Guest_eduardo2017GPS_*

Guest_eduardo2017GPS_*
  • Guests

Posted 26 January 2017 - 07:44 AM

 

Boa noite.
 
O nosso amigo Allan postou um video, segue: https://youtu.be/mQIuGR0x5p4
 
Att. RM Rastreadores.
www.RMRASTREADORES.com

 

Poderia me dizer se as soluções de dispositivos de atualização TLT-2H são compatíveis com o modelo TLT-1C?
Obrigado.


#77 Guest_orangeuser_*

Guest_orangeuser_*
  • Guests

Posted 26 January 2017 - 14:17 PM

Hi All,

 

I have found in another site that the connectors for the older (non mini USB) are: JST 1mm pitch connector, part number SHR-05V-S- . Counterpart housing is part number B BM05B-SRSS-TB, and crimp terminals SSH-003T-P0.2 (RS sells pre-crimped 150mm wires). I have ordered these today to test them soon for my v500 units that are not on a data plan. I will let you know if the connectors are correct.

 

For the newer version, with the mini USB connector, the flashing via the PC is working fine. I can confirm successful flashing of  v600/v700 with V4.02.251HF4-M and this is working and is now V4.02.252HF4-M. The units show in our application and are working fine.

 

Flashing Over the Air (OTA)

I have also succesfully done OTA firmware updates, but this has only been succesful for the older units V500 with the SW version V3.02.172. I placed the updated (downgraded) software files for the V500 V3.02.158VYJ005 in the root of FTP server. You need to take care that the server username is simple and short and so is the password. It can only contain letters and numbers and his limited length. If you use username: update password: update1234 it will work. The command you need to use is !-0000,[serveradress or IP],username,password. For example: !-0000,ftp.updateserver.com,update,update1234 The units are flashing correctly, but be aware of potential problems with empty battery! I lost 1 unit that is now not responding, I think it went dead during flashing. You do need working gprs connection and sufficient data in your plan. All files need to be in the root of ftp server. these are openatdll.dll, scatOPENAT.txt and V500.bin. You need to be patient because the transfer of the data may take time, since gprs is slow. If you have many units in the field, this might be your best bet. Make the engines run for power!

Hello gertjotigelaar,

where i can find the update software for V500 with softwareV3 version?



#78 Guest_fipbento_*

Guest_fipbento_*
  • Guests

Posted 26 January 2017 - 14:42 PM

Bom dia @fipbento estarei no aguardo da solução.

 

Obrigado.

 

 

Good Morning @fipbento. I will be waiting the solution.

 

Thank You.

 

Greetings to all again.

 

It's precisely what Orange Fan said.

I went to get the connector to the store and after I got it I got the reference. I found out that you can buy it online even on ebay. 

If ever need one more I will get it from here: http://pt.farnell.co...5way/dp/1679111

 

All I need now is to find out what pin from the shr-05v-s-b goes on any pin of the PL2303 converter... I'm really afraid to burn my TLT-2H now...

 

I'll keep you guys posted when I have time to make the test because the PL2303 converter has not arrived yet.



#79 Guest_gertjotigelaar_*

Guest_gertjotigelaar_*
  • Guests

Posted 26 January 2017 - 15:32 PM

Hello gertjotigelaar,

where i can find the update software for V500 with softwareV3 version?

Hi Orangeuser

 

it is here: https://drive.google...EdtaXRSMTA/view

 

It has normal and F4 version. I have flashed both with OTA via FTP and it works. 



#80 Guest_orangeuser_*

Guest_orangeuser_*
  • Guests

Posted 26 January 2017 - 22:39 PM

Hi Orangeuser

 

it is here: https://drive.google...EdtaXRSMTA/view

 

It has normal and F4 version. I have flashed both with OTA via FTP and it works. 

 

Thank you. But i have problem, after i put the files ( openatdll.dll, scatOPENAT.txt and V500.bin ) on ftp, the update process are succesfully. And then the tracker shut down (indicated with the led lamp), and it can not turn on anymore. Here is the log on ftp server:

 

000012)27/01/2017 5:07:45 - (not logged in) (114.125.178.194)> Connected on port 21, sending welcome message...
(000012)27/01/2017 5:07:45 - (not logged in) (114.125.178.194)> 220 Wellcome to FTP server
(000012)27/01/2017 5:07:45 - (not logged in) (114.125.178.194)> USER update
(000012)27/01/2017 5:07:45 - (not logged in) (114.125.178.194)> 331 Password required for update
(000012)27/01/2017 5:07:46 - (not logged in) (114.125.178.194)> PASS ****
(000012)27/01/2017 5:07:46 - update (114.125.178.194)> 230 Logged on
(000012)27/01/2017 5:07:46 - update (114.125.178.194)> TYPE I
(000012)27/01/2017 5:07:46 - update (114.125.178.194)> 200 Type set to I
(000012)27/01/2017 5:07:47 - update (114.125.178.194)> SIZE openatdll.dll
(000012)27/01/2017 5:07:47 - update (114.125.178.194)> 213 93214
(000012)27/01/2017 5:07:47 - update (114.125.178.194)> PASV
(000012)27/01/2017 5:07:47 - update (114.125.178.194)> 227 Entering Passive Mode (xxx,xxx,xxx,xxx,198,76)
(000012)27/01/2017 5:07:48 - update (114.125.178.194)> REST 0
(000012)27/01/2017 5:07:48 - update (114.125.178.194)> 350 Rest supported. Restarting at 0
(000012)27/01/2017 5:07:48 - update (114.125.178.194)> RETR openatdll.dll
(000012)27/01/2017 5:07:48 - update (114.125.178.194)> 150 Opening data channel for file download from server of "/openatdll.dll"
(000012)27/01/2017 5:07:48 - update (114.125.178.194)> 226 Successfully transferred "/openatdll.dll"
(000012)27/01/2017 5:08:12 - update (114.125.178.194)> QUIT
(000012)27/01/2017 5:08:12 - update (114.125.178.194)> 221 Goodbye
(000012)27/01/2017 5:08:12 - update (114.125.178.194)> disconnected.
 
Please give me advice.
Thanks.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users