Jump to content


TLT-2H not working after 2017


  • Please log in to reply
158 replies to this topic

#41 Guest_AGN brasil_*

Guest_AGN brasil_*
  • Guests

Posted 11 January 2017 - 08:39 AM

Good evening.

The procedure is complex and requires attention, the main factor and use the correct cable, then identify which COM port the device is. It really is difficult to help without being in person.

Att. RM Trackers
Www.RMRASTREADORES.com


RM

Eu encontrei o dispositivo pela porta com, encontrei a versão, o grande problema é fazer o processo de download and format, não acontece nada, os segundo passam constantes, cheguei esperar literalmente 1000 seg.e a barra do primeiro processo não enche,já que na imagem do tutorial disponibilizado aqui no fórum, vi que com apenas pouco segundos o processo era finalizado,enfatizando que o soquete dos rastreadores TLT2H e TLT2HU as polaridades dos pinos são diferente, já atentei pra isso, a cinco pinos em todos. gostaria de saber se apenas TX RX GND são conectados? Já que o dispositivo foi encontrado pela porta COM, faço tudo passo a passo mais na hora de atualizar :(

#42 Guest_ALLANCP15_*

Guest_ALLANCP15_*
  • Guests

Posted 11 January 2017 - 15:33 PM

Boa tarde estou comprando um cabo pl2303 para adaptar em um cabo mini usb..e tentar fazer essa atualização...seia bom um tutorial no youtube passo a passo..só esta faltando o cabo para eu atualizar meus aparelhos e fazer esse post para tentar facilitar esse problema que muitas pessoas estao enfrentando.incluindo eu..

#43 Guest_Hiluxtonho_*

Guest_Hiluxtonho_*
  • Guests

Posted 11 January 2017 - 19:10 PM

Boa tarde estou comprando um cabo pl2303 para adaptar em um cabo mini usb..e tentar fazer essa atualização...seia bom um tutorial no youtube passo a passo..só esta faltando o cabo para eu atualizar meus aparelhos e fazer esse post para tentar facilitar esse problema que muitas pessoas estao enfrentando.incluindo eu..

 

 

ESPERO QUE VC TRAGA A SOLUÇÃO PARA MUITOS AMIGOS.



#44 Guest_RM2017_*

Guest_RM2017_*
  • Guests

Posted 12 January 2017 - 02:20 AM

Good evening.
 
The cable can be made by purchasing a PL2303 card, as well as a Mini usb cable, being connected to the card.
 
Att. RM Trackers
Www.RMRASTREADORES.com


#45 Guest_jurnet_*

Guest_jurnet_*
  • Guests

Posted 12 January 2017 - 14:43 PM

Hi from france,

Can you explain , like a tuto, how to fix the bug on the firmware please ?

Which cable i have to buy and where, if i have to use windows, mac or linux, where i can download the firmware and soft to repair the device.

 

Thanks 



#46 Guest_RM2017_*

Guest_RM2017_*
  • Guests

Posted 12 January 2017 - 22:28 PM

Hi from france,

Can you explain , like a tuto, how to fix the bug on the firmware please ?

Which cable i have to buy and where, if i have to use windows, mac or linux, where i can download the firmware and soft to repair the device.

 

Thanks 

 

Good morning mate.
 
In this link you will find everything that is necessary to update your crawler, it is only download.
The cable we sell, plus if you know how to make it teach you:
Buy a PL2303 USB converter and a mini usb data cable that has 4 wires, connect the cored wires with the colors, do not connect the red wire. The mini usb side connects to the tracker, and the PL2303 card connects to your computer. It may be in windows 7 the upgrade process.
 
Att. RM Trackers
Www.RMRASTREADORES.com


#47 Guest_RM2017_*

Guest_RM2017_*
  • Guests

Posted 12 January 2017 - 23:24 PM

RM

Eu encontrei o dispositivo pela porta com, encontrei a versão, o grande problema é fazer o processo de download and format, não acontece nada, os segundo passam constantes, cheguei esperar literalmente 1000 seg.e a barra do primeiro processo não enche,já que na imagem do tutorial disponibilizado aqui no fórum, vi que com apenas pouco segundos o processo era finalizado,enfatizando que o soquete dos rastreadores TLT2H e TLT2HU as polaridades dos pinos são diferente, já atentei pra isso, a cinco pinos em todos. gostaria de saber se apenas TX RX GND são conectados? Já que o dispositivo foi encontrado pela porta COM, faço tudo passo a passo mais na hora de atualizar :(

Good evening.
 
Yes, exactly. Just do not plug the red wire. Connect the cable in this way.
 
Check for some errors:
1) In the option to select the version, make sure it is the last folder, opening and selecting the folder until you find the last folder.
2) It is important to format the device before starting the process, in the multiport program, on the right side, select the format option, in the last option, then follow the same start process with the tracker turned off, and after start, feed the tracker . Ready, the FR ERROR is normal. After that, the manual process is repeated.
3) Look at the folder: backup_and_restore_data, if you have something inside, please delete it before starting the STAR.
 
4) Note if error appears and report errors.
 
Doing correctly from 1 to 3, will certainly work out.
 
Att. RM Trackers.
Www.RMRASTREADORES.com


#48 Guest_jurnet_*

Guest_jurnet_*
  • Guests

Posted 13 January 2017 - 11:43 AM

Hi just to be sure, I have to buy this USB PL2303 : 

https://www.amazon.f...keywords=Pl2303

One cable like this :

https://www.amazon.f...=cable mini usb

Then connect the cored wires with the colors, but not the red wire.

BUT THERE IS NO COLOR ON PL2303 ?

 

Thank you



#49 Guest_RM2017_*

Guest_RM2017_*
  • Guests

Posted 13 January 2017 - 17:00 PM

Hi just to be sure, I have to buy this USB PL2303 : 

https://www.amazon.f...keywords=Pl2303

One cable like this :

https://www.amazon.f...=cable mini usb

Then connect the cored wires with the colors, but not the red wire.

BUT THERE IS NO COLOR ON PL2303 ?

 

Thank you

 

Good Morning.
 
Yes, exactly, these are the right products.
If you do not have color, you have information such as TX, RX, GND.
 
RX = White Wire
TX = Green Wire
GND = Black wire.
 
Note:
1 = Do not connect the red wire.
2 = Solder the wire on the board, avoid touching the board components with your finger so it does not burn, even if it is off, touch next to it to connect to the computer's usb.
 
Att. RM trackers.
Www.RMRASTREADORES.com


#50 Guest_orangeuser_*

Guest_orangeuser_*
  • Guests

Posted 16 January 2017 - 02:35 AM

 

I do not have the firmware files.
 
update the firmware from the manufacturer's server I tried, but it does not help
 
the server has old firmware. those. the device will ship what already has
 
see: 
old -- SOFTVER:V4.02.248F4 RELEASE, Dec  7 2013 12:27:32
new -- Remote upgrade complete. Version number still V4.02.248F4 RELEASE, Dec  7 2013 12:27:32.
 
old -- SOFTVER:V4.02.249 RELEASE, Mar 25 2014 12:26:41
new -- Remote upgrade complete. Version number still V4.02.249 RELEASE, Mar 25 2014 12:26:41
 
old --  SOFTVER:V3.02.171 2012/03/01 RELEASE  
new -- Remote upgrade complete. Version number still V3.02.171 2012/03/01 RELEASE.
 
Tomorrow I'll get one device that does not work. I try to figure out how to revive him :)  I will write on the results.
 
I hope if someone will find a solution, he lay here.

 

 

mihails_al, can you tell me how you do remote upgrade? i am trying send sms coomand !-0000,ftpserver.com,ftpuser,ftppasswd

But no reply at all from the tracker. The tracker already on gprs mode. Are there is some special command required?

 

Thanks.



#51 Guest_WilliamKBR_*

Guest_WilliamKBR_*
  • Guests

Posted 16 January 2017 - 16:33 PM

More thechical info about Leap Second and GPS:

 

Before the leap second:
GPS-UTC = +17 s (i.e., GPS is ahead of UTC by seventeen seconds)
 

After the leap second:
GPS-UTC = +18 s (i.e., GPS will be ahead by eighteen seconds)

 

http://blog.leica-ge...-a-leap-second/



#52 Guest_WilliamKBR_*

Guest_WilliamKBR_*
  • Guests

Posted 16 January 2017 - 16:35 PM

Does anyone had problems in the last Leap Second in June 30 2015 ?



#53 Guest_RM2017_*

Guest_RM2017_*
  • Guests

Posted 17 January 2017 - 21:18 PM

mihails_al, can you tell me how you do remote upgrade? i am trying send sms coomand !-0000,ftpserver.com,ftpuser,ftppasswd

But no reply at all from the tracker. The tracker already on gprs mode. Are there is some special command required?

 

Thanks.

 

Good morning.
 
The remote update servers are disabled because the factory has closed.
The only way to upgrade is via cable, and with the necessary programs.
 
Att. RM Trackers.
Www.RMRASTREADORES.com


#54 Guest_rizqitrace_*

Guest_rizqitrace_*
  • Guests

Posted 18 January 2017 - 02:53 AM

 

Good Morning.
 
The update must be done via cable, follow the download link of the files and manuals to update:
 
I hope I have helped.
RM Rastreadores.
www.RMRASTREADORES.com

 

Thanks for the download link

 

Hi All

 

I just encountered failed during firmware update because of drained battery

When i try again with full charge battery, the TLT 2H can not respons *SWVER# command and i can not start the update again

I confirmed that my cable is ok, i tested it using other device and working

 

is there any solution for this problem? 

 

Please advice

 

Thanks you



#55 Guest_mihails_al_*

Guest_mihails_al_*
  • Guests

Posted 18 January 2017 - 14:33 PM

mihails_al, can you tell me how you do remote upgrade? i am trying send sms coomand !-0000,ftpserver.com,ftpuser,ftppasswd

But no reply at all from the tracker. The tracker already on gprs mode. Are there is some special command required?

 

Thanks.

 

you can not update the firmware via ftp

 

to update the software use the cable and software suggested by the distinguished RM2017



#56 Guest_mihails_al_*

Guest_mihails_al_*
  • Guests

Posted 18 January 2017 - 14:43 PM

Thanks for the download link

 

Hi All

 

I just encountered failed during firmware update because of drained battery

When i try again with full charge battery, the TLT 2H can not respons *SWVER# command and i can not start the update again

I confirmed that my cable is ok, i tested it using other device and working

 

is there any solution for this problem? 

 

Please advice

 

Thanks you

 

most likely not be able to solve the problem, you've got a brick. 

I accidentally turned off the power to one device during the firmware, and it turned into a brick :)

 

 

older firmware versions are not listed in the list updated to the nearest correct version!

 

see -->

 

>>> SOFTVER:V4.02.247F4 2013/09/11RELEASE
HARDWAREVER:N/A
 
update to -- V600 V4.02.250F4    
 
 
>>> SOFTVER:V4.02.250F4 RELEASE, Jan  4 2017 16:43:37  
HARDWAREVER:N/A 
 
and
 
>>> SOFTVER:V4.02.238 2013/03/25RELEASE
HARDWAREVER:N/A
 
 
update to --  V600 V4.02.250
 
>>> SOFTVER:V4.02.250 RELEASE, Jan  4 2017 16:36:45
HARDWAREVER:N/A
 
after updating the device operating normally!
 
---  --- 
 
tomorrow I will be in possession of devices with firmware: V3.02.172
after upgrade I will write results


#57 Guest_WilliamKBR_*

Guest_WilliamKBR_*
  • Guests

Posted 18 January 2017 - 20:07 PM

I didn't start upgrade with cable yet, since I'm waiting for PL2303 adapter.

 

My tests shows this versions:

 

STILL WORKING AFTER 2017:

3.02.160F4 2011/05/13

 

DON'T WORKING:

3.02.169F4 2012/02/07

4.02.249F4 MAR 27 2014

4.02.250H-M SEP 13 2014

 

Those are Quadriband models, I also have some Dualband devices to check.



#58 xdajul

xdajul

    Orange Experienced

  • Members
  • PipPipPip
  • 38 posts

Posted 18 January 2017 - 21:01 PM

wow un-be-lievable .. that's what you get for buying cheap Chinese goods I guess  <_<

 

3.01.141 2010/11/01 is working too!

 

Nevertheless, I still had a TLT-2K laying around and wanted to test to tools above.

Only I don't get any response using my Arduino. What's so specific about this PL2303 device? It's just serial2usb right? No need for resistors and such?


  • RobertAtoda likes this

Have you tried my TLT-2H Easy Setup App?


#59 Guest_Shahzad Sohail_*

Guest_Shahzad Sohail_*
  • Guests

Posted 19 January 2017 - 12:33 PM

We r using TLT 2HU since long time but i am faceing problem since 1-1-2017 my whole devices not responding on any comand kindly guide me how to resolve this issue
BR
Shahzad 
Ptmw@live.com 

#60 Guest_Shahzad Sohail_*

Guest_Shahzad Sohail_*
  • Guests

Posted 19 January 2017 - 14:58 PM

We r using TLT 2HU since long time but i am faceing problem since 1-1-2017 my whole devices not responding on any comand kindly guide me how to resolve this issue
BR
Shahzad
Ptmw@live.com

Remote upgrade complete. Version number still V4.02.240GF4 2013/04/17RELEASE.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users