Hi, new version have great look, but loss of feature.
I cannot find config for send comand to GT06 tracker
and engine block/unblock buttons.
Date error on tracks.
Jump to content
Posted 04 July 2014 - 08:34 AM
yes, but normally GT06 is a vehicle tracker. OK, we will keep in mind that and figure out something.
Thanks for answer.
Yes, this is original GT06N vehicle tracker, not fake.
In old version working well with GT06 setting,
supported TCP command for engine block/unblock.
But in new version I cannot find this setting.
Other lanuage will be supported? ( Hungarian )
Thanks and regards
Posted 09 July 2014 - 11:51 AM
commands are likely to be added later, but not 100%
as for languages i can give you a file with some keys to be translated by you, then we will implement it in the service, cause in our team none of us speaks Hungarian, sorry
Thanks. Sure, I can translate for your system, please send to email@example.com
Posted 25 February 2015 - 00:47 AM
my gt06 in gprs mode if my car iddle always sent data to server every 5 minute. Can everyone help me to set in iddle my gt06 will sent data every 20 minute ?
This data to sent content by: time & parameters fill with 'voltage=6, gsm=4, I/O=4/0'
Posted 21 January 2016 - 05:44 AM
4.19 set the server IP and port :SMS : IP + space + IP address + space + port numberExample : IP 22.214.171.124 8500Re : set IP
4.18 APN settings:Set APN instruction format : apn123456 apn (about APN please consult your SIM card supplier )Reply : apn okSet APN corresponding user name instruction format : apnuser123456 userReply : apnuser okSet APN corresponding password command format : apnpasswd123456 passwordReply : apnpasswd ok
Use id.wialon.net site to check if your device connects to our servers.
I do not answer emails and personal messages|Я не отвечаю на личные сообщения и почту.
Posted 28 February 2017 - 07:34 AM
GT06E 3G GPS Tracker Multifunctional Tracking Device
GPS Tracking Solution from jimilab.com
0 members, 0 guests, 0 anonymous users