Olá Recentemente comprei um rastreador H08 do ebay e como de costume o manual do usuário contém apenas o básico do básico...
Cellphone SIM Card Number Binding
After the terminal start up normally, please bind your cellphone number first, alarms will send to this bound number.
Send SMS: *ZC#terminal password# Cellphone SIM card number#Terminal SIM card number#
Initial password is 000000, command start with *
Send SMS: *MP#Previous terminal password#new terminal password# (6 numbers)
Initial password is 000000, new password is 987654
Get Terminal Position by SMS
Send SMS: DW to terminal, it will reply the terminal current geography location
e.g.: south east 30 meters, ABC company, Meilong Rd, Shenzhen, Guangdong Province,China.
Google Address Link
Send SMS: GOOGLE to terminal, it will reply the terminal current geography location link http://maps.google.com/maps/?f=q&hl=en&&q=31.237395,121.390373333333;S=0;D=2012-5-23 12:00:00;D=0
Please note: the default time is Greenwich time, actual time needs to add your time zone number
e.g.: enquiry time is 12:00:00, Chinese time is 20:00:00 (+ 8 hours)
Engine Control (Optional)
When the vehicle was stolen, the administrator can send Cut-off Engine command via the live tracking monitoring system, Under the conditions of safe driving, the command will trigger the relay to cut off power of oil pump to stop the engine, and it can’t be re-start the engine without restore engine command.
To secure the safety of vehicle, the terminal shall in valid GPS signal status, also speed under 20km/h or still status to cut off engine.
After the theft alarm dismissed, send restore engine command via live tracking monitoring system will trigger relay to restore the power of oil pump, the vehicle will able to start up.
Cut off oil pump power
Send SMS: DYpassword to terminal, and reply: Config ok
Restore Oil pump power
Send SMS: TYpassword to terminal, and reply: Config ok
Intial password is 000000
Alarm Method Settings
Send SMS to set the alarm method:
KC0 : Close all arlms;
KC1 : SMS alarm;
KC2 : Phone call alarm;
KC3 : SMS+Phone call alarm;
Default Alarm status:
Park still status (ACC): Vibration Alarm On;
Driving Status (ACC): Vibration Alarm Off;
Send SMS: SF to turn on vibration alarm;
Send SMS: CF to turn off vibration alarm;
Movement Alarm on when the vehicle is at vibration alarm on status.
Turn On SMS Command: *MVALMON#000000#
Turn Off SMS Command: * MVALMOFF#000000#
Condition Set SMS Command: *MVALM#000000#Speed#Vibration Times#
3: Speed>=3km/h & 10 time vibration detected, then movement alarm triggered.
Alguém sabe qual o comando para restaurar as configurações de fábrica??